Gas Solenoid Valve Delta ElektrogasIndonesia Industrial Parts

Overview

Electromechanical DELTA and its brand Deltapumps and Elektrogas are leading manufacturers of gear oil pumps and safety control valves, exported in more than 60 countries in the world. The study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase in their performance.

The automation of the production and the assembly lines have been planned following a “Just in Time” philosophy, permitting Delta-Elektrogas to follow a global and flexible Management of the complete production system. In this way, it has been possible to answer in a very short time the Diverse and Specific requirements of the product. Gas Solenoid Valve

The experimentation of the new technical solutions and the very stringent reliability tests which every new product is subjected to, guarantee the safety and the quality of all products introduced into the market.

The use of highly advanced machines and specialised equipment, together with the employees’ expertise, are essential requirements to execute high precision machining which is subjected to very strict dimensional tolerances.

The awareness that the total quality depends on every single aspect, has focussed our attention to implementing the strict control procedures, to guarantee the conformity of every single component, to the project’s requirements.

This approach has been made possible due to continuous investments in the renewal of the Production Equipment and the Testing and Measuring systems.

Our Quality System has been accredited to the international standard ISO 9001 and our Products approved by the relevant International Certification Bodies. These are the final guarantees of a high quality standard.

Elektrogas Valve Product

Automatic Safety Valves

Elektrogas VMR VMR60 Safety solenoid valves

Safety solenoid valves for air and gas, fast opening and fast closing type The VMR type valve is a fast opening solenoid valve that is normally closed. When the coil is not energized the spring works on the disc keeping the gas passage closed. When the coil is powered the valve opens. When power is switched off the […]

Elektrogas VML VML60 Safety solenoid valves

Safety solenoid valves for air and gas slow opening and fast closing The VML type valve is a safety valve that is normally closed, with fast or slow opening and adjustable rapid section for initial gas flow. When not in working position the spring works on the disc keeping the gas passage closed. When the coil is powered […]

Elektrogas VMH Safety shut off valves

Safety shut off valves, slow opening and fast closing with hydraulic or pneumatic actuator The VMH type valve is a safety shut off valve for gaseous media operated by hydraulic actuator. It is suitable for gas blocking and releasing controls, as required in the main pipe of gas power burners, atmospheric gas boilers, industrial kilns and […]

Elektrogas VMM Multiple safety solenoid valve

Multiple safety solenoid valve for gas regulating trains The VMM type valve is a combination of two valves in an only compact and versatile valve housing. The first valve is a fast opening safety solenoid valve. The second valve may be a fast opening or a slow opening solenoid valve to adjust the gas flow, […]

Elektrogas VMRNA Automatic vent valves

Automatic vent valves for gas appliances VMRNA type is an automatic vent valve for gas appliances. It is suitable for discharging gas excess or gas leakage into relief lines. VMRNA valve is a reverse acting solenoid valve: when deenergized, the valve is open (N.O. normally open). VMRNA valve can be integrated in Elektrogas VMM multiple […]

Elektrogas Manual Reset Safety Valves

Elektrogas EVRMNC EVRM6NC Safety solenoid valves

Safety solenoid valves for gas with manual reset, normally closed The EVRM-NC type valve is a manual reset safety valve that is normally closed. When the coil is not energized the spring works on the shutter keeping the gas passage closed. Simply by energizing the coil the valve does not open. It is necessary to manually […]

Elektrogas EVRMNA EVRM6NA manual reset safety valve

The EVRM-NA type valve is a manual reset safety valve that is normally open. A manual operation is therefore necessary to open the valve and set the mechanism consenting to maintain this state. The powering by means of line current and/or condenser discharge, induced by the leakage detector, causes tripping of the mechanism and consequent […]

Elektrogas Control Valves

Elektrogas LMV Linear modulating valves

Linear modulating valves Modulating valves LMV are used in combustion processes that require linear adjustment of air or gas flow. The flow varies proportionally to the opening angle of inner mechanism, therefore flowrate is very predictable. The valve can be operated with stage control (3-point, MZ3 servomotor) or with continuous modulation (analogue signals, MZ5 servomotor). […]

VF VFT VFH Butterfly valves

Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using a lever (to setup the high-fire rate of the burner) or automatically using a servomotor (modulating or staged control) or a solenoid actuator (two-stage control). The setting […]

Elektrogas VRA VLA VTA Solenoid valves

Solenoid valves for combustion air regulation The VRA/VLA/VTA types are normally closed solenoid valves for cold combustion air regulation. When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power […]

Elektrogas SR SL ST Solenoid actuator valves

Solenoid actuator for butterfly valves Solenoid actuators are designed to operate VF and VFH butterfly valves. When the coil is not energized the inner spring pushes down the plunger and, by means of a gear mating, shifts the connected valve to the minimum opening position. When the coil is powered the plunger moves up fast (SR) […]

Elektrogas MZ Servomotor for control valves

Servomotor for control valves Servomotors MZ are designed to operate VF, VFT and VFH butterfly valves and LMV linear modulating valves. MZ2 and MZ3 types are suitable for basic adjusting position, operated by cams connected to driving shaft. MZ5 type is suitable for advanced adjusting position, controlled by analogue signals with very high positioning precision. MZ5 […]

Elektrogas Gas Regulation

Elektrogas R-RS -125 pressure gas regulators

Medium pressure gas regulators R… type products are pressure regulators for gaseous media, suitable for all types of gas consuming appliances. R-125 models are high pressure devices with inlet pressure till 10 bar or 12.5 bar. RS-125 is a regulator that integrates a safety shut-off valve. In order to assure the safest working conditions, shut-off […]

Elektrogas VS Pressure relief valves

Pressure relief valves VS type is a pressure relief valve designed to reduce temporary pressure peaks in burning appliances. The shutting-off of automatic valves or non-tightly closing of regulators can cause pressure increase; by releasing that overpressure in a relief line, VS valve enables the system to work properly again.

Elektrogas R-RF Gas pressure regulators

Gas pressure regulators with filter The R… type products are pressure regulators for gaseous media, suitable for all types of gas consuming systems. RF is a regulator with an integrated 30-micron filtering element. All models are equipped with compensation diaphragm to assure high accuracy and are designed to perform lock-up function. Max inlet pressure 500 […]

Elektrogas RAG Gas pressure regulators

Gas pressure regulators with filter and safety shut- off valve The R… type products are pressure regulators for gaseous media, suitable for all types of gas consuming appliances. RAG is air/gas ratio control (1:1) for combustion processes. It is provided with adjustable offset spring (+/-3mbar) and adjustable bypass. It is also usable as zero-pressure governor. […]

Elektrogas RFS Gas pressure regulators

Gas pressure regulators with filter and safety shut- off valve *** Work in progress *** RFS is a regulator with on board filter and safety shut-off valve. In order to assure the safest working conditions, shut-off valve and regulating member are totally independent. All models are equipped with compensation diaphragm to assure high accuracy and […]

Elektrogas Valve Proving Systems

Elektrogas LD LDM tightness control

Tightness control LD tightness control is designed to verify the absence of inadmissible leaks in gas trains composed by automatic shutoff valves. The check can be performed before the ignition of the gas burner or after its stop. This device is used in industrial firing processes and in forced draught burners (when power is higher […]

Elektrogas Filtering

Elektrogas FG Gas filters

Gas filters Filters for gas pipelines with very high holding capacity of dust and impurities, suitable for protection of devices installed downstream. The filter cartridge is a steel supported frame covered with a high performance nonwoven made of polypropylene fibres, which satisfy the stringent requirements of Fire Class F1 according to DIN

Elektrogas Accessories

Elektrogas CFK Burner control system

Burner control system CFK burner control system is a device that ignites and monitor the flame in the industrial gas burners with continuous service, with self-test function of the detection circuit. CFK is available with single control or double control for valves. Flame detection can be done via a single rod, two rods or UV […]

Elektrogas CPT Quanto Gas meters

Quantometers for Gas CPT Quantometers are non fiscal turbine and rotary gas meters. Quantometers are usually adopted in industrial systems to control and optimize gas consumption.

Elektrogas VSG globe valve for gas

VSG type is a globe valve for gas suitable for inline installation and end-of-the-line mounting. The inner globe is manufactured with a full and straight gas passage that results in low pressure drop and limited generation of turbulence. VSG is usually supplied with manual lever but it can be operated by various actuators. Special versions […]

Elektrogas PCS mechanically switch

Proof of closure switch The PCS is a mechanically activated switch for monitoring the position of the valve plate. This device can be fitted to valves and actuators. It is designed in accordance with norm EN161 to detect the closed status. The compact, robust and functional design permits a simple and quick installation even on […]

Elektrogas PSG 901 Pressure Switch

The PSG 901 is an adjustable pressure switch for monitoring overpressure of air and non-aggressive gases (families 1-2-3 EN437). The pressure switch is available in different pressure ranges, all with male threaded connection G1/4. Special versions are available for use with aggressive gases. The compact, robust and functional design permits a simple, quick, and essentially […]

Elektrogas MG Pressure gauges

Pressure gauges for Gas MG pressure gauges are robust instrument suitable for fast measurement on site. MG are available with display dimension Ø63, Ø80 and Ø100. A button valve type ME can be installed to prevent damages due to pressure surges.

Delta pumps

Contact us : sales@wmablog.com or visit to our E-Commerce