Flow Sensor HUB-40 Series AW Lake

Flow Sensor HUB-40 Series AW Lake
Flow Sensor HUB-40 Series

AW Lake is a corporate from United States of America that sell some product such as Positive Displacement Meters, Turbine Flow Meters, Tricor Coriolis Flow Meter, Lake Variable Area Flow Meter, Lake Paddle Wheel Flow Meter “Flow Stat”, Monitor&Controllers, Flow sensor & Pickups. One of the product that comes from the categories of Flow Sensor & Pickups is Flow Sensor HUB-40 Series.

In the categories of flow sensor & pickups there are another product such as CAPM-2 Carrier Frequency Sensor, FAC-S Analog Output Sensor, etc.

Flow Sensor HUB-40 Series

Ideal for any industry or flow measurement application where an non-hazardous sensor is required, such as in
hydraulic systems.

Flow Sensor HUB-40 Series:

  • Supply Voltage: 10-24 VDC
  • Supply Current: 8 mA @ 12 VDC, 12 mA @ VDC
  • Sensor/Monitor Frequency Output: Flow Dependent, 0.5 Hz minimum
  • Output Ampliture: VHIGH = VSUPPLY – 0.7 Volts, VLOW = 0 Volts
  • Duty Signal: 50% ± 15%
  • Temperature Ratings: -20 to 85°C (-4 to 140°F)

Features:

  • Square wave output signal has a duty cycle of approximately 50%.
  • For use with most meter sizes of the following AW-Lake flow meters:
    – JVM-xxx gear meters
    – JVS-xxx gear meters
    – JVHS-xxx gear meters
    – ZHM-xxx gear meters
    – HPM-xxx turbine meters
    – HM-xxx turbine meters
    – TRG-xxx turbine meters
    – SRZ-xxx gear meters

Advantages:

Up and Running in Minutes: Easy thread-in installation. A quick setup procedure allows you to have the sensor working with just a few simple installation steps.

Flexible Mounting: Because of the integral swivel union, the HUB-40 unit can be rotated 360° for easy wiring. Options available to fit any AW Gear Meter or Turbine Meter.

Weather-Proof Enclosure Optional NEMA 4X enclosure provides environmental protection from moisture and debris.

Built-In Protection: The signal outputs are protected by a self-resetting fuse with a 50 mA nominal trip point.

Baca Juga :

Specification:

Supply Voltage: 10-24 VDC

Supply Current:

  • 8 mA @ 12 VDC
  • 12 mA @ 24 VDC

Sensor/Monitor Frequency Output: Flow dependent, 0.5 Hz minimum

Output Amplitude

  • VHIGH = VSUPPLY – 0.7 Volts
  • VLOW = 0 Volts

Duty Signal: 50% ± 15%

Connection Available

  • 3 pin connector
  • Flying leads
  • Junction bix with terminal block
  • JST Connector

Temperature Ratings: -20 to 85°C (-4 to 140°F)

Download Data Sheet: Flow Sensor HUB-40 Series

Reference: aw-lake.com

Flow measurement Flow sensor