The 6213 EV valve is a servo-assisted solenoid valve of the S.EV series. The spring coupling of the diaphragm supports the opening process of the valve. In its standard version, the valve is suitable for use in liquids. A minimum differential pressure is required for a complete opening.
A special version (HP00) which opens the valve without differential pressure is available for gas and vacuum applications. Various diaphragm material combinations are available depending on the application.
The standard brass housing satisfies all European drinking water requirements. Dezincification-resistant brass is available for other markets. The housing offering is rounded off with a stainless steel version. To reduce power consumption in operation, coils with “Kick and Drop” (KD) electronics (double coil technology) are available.
In combination with a plug in accordance with DIN EN 175301-803 Form A, the valves satisfy protection class IP65 – in combination with a stainless steel housing NEMA 4X. This product can be combined with Cable Plug type 2518, Cable Plug type 2513, and Timer type 1087.
Features
- Servo-assisted diaphragm with a diameter of up to DN40
- Spring-coupled diaphragm opens without differential pressure
- Damped design for quiet closing
- Compact construction with a high flow rate
- Energy-saving double coil technology with kick-and-drop design
Specifications
Technical Data
Product properties
- Materials
Body :
Brass acc. to DIN EN 50930-6
Stainless steel 1.4408
Gunmetal (external thread) DN10…DN20
Coil : Polyamide, epoxy (insulation class H)
Seal : NBR, FKM, EPDM
The inner part of a valve :
Brass body: Brass, stainless steel, and PPS
Stainless steel body: Stainless steel and PPS
Gunmetal body: Stainless steel and PPS (external thread) DN10…DN20 - Orifice :
Standard: DN10…DN40
HP00: DN13…DN20
Electrical data
- Voltage tolerance: ±10%
- Voltages :
Standard: 024/DC, 024/50, 230/50, 110/50, 120/60
HP00: 24 V (50…60 Hz), 230 V (50…60 Hz)
Performance data
- Duty cycle : 100% continuous rating; KD coil; max. rating 6 circuit switches/minute
Response times AC / DC - DN10…DN13 :
Opening: 10…100 ms
Closing: 100…200 ms - DN20 :
Opening: 200…300 ms
Closing: 400…700 ms - DN25…DN40 :
Opening: 300…400 ms
Closing: 800…1400 ms - Power consumption: Depending on orifice and coil size. For detailed information, see “5. Performance specifications” on page 9 of the datasheet.
Medium data
- Medium
NBR : Neutral fluids, water, hydraulic oil, oil without additives
FKM : Per-solutions, hot oils with additives
EPDM : Oil and fat-free fluids and gases - Medium temperature
NBR : -10 °C…+80 °C
FKM :
0 °C…+90 °C with polyamide coil
0 °C…+120 ºC with epoxy coil
EPDM :
-30 °C…+90 °C with polyamide coil
-30 °C…+100 °C with epoxy coil - Viscosity: Max. 21 mm2/s
Approvals and certificates
- Protection class :
IP65 with cable plug and cable connection
IP65 with terminal box
(further versions on request)
Product connections
- Electrical connection: Tag connector acc. to DIN EN 175 301-803 Form A (see “6.4. Ordering chart accessories” on page 14 of datasheet)
Environment and installation
- Installation: As required, preferably with an actuator upright
- Ambient temperature : Max.+55 °C
Approval
• Drinking water approval acc. to KTW/W270 (PF23)
• VDE Approval acc. to DIN EN 60730 (VDE0631)
(PW01/PW02)
• Watermark Licence (PF20)
• UL(UL-listed) approval (MH10753) (PE95)
• UR(UL-recognized) approval (PE94)
• NEMA 250 Type 4X
• WRAS approval (PD23) (DN10, DN13, DN20) (PD23)
• Safety shut-off valve for combustion facilities
according to DIN EN ISO 23553-1 (PD22)
Orifice 10/13/20 in brass and stainless steel is also
available in explosion proof version
Explosion proof approvals (NA10+PX58):
• ATEX:
– EPS 18 ATEX 1 232 X
– II 2G Ex mb IIC T4 Gb
– II 2D Ex mb IIIC T130ºC Db
• IECEx:
– IECEx EPS 18.0110X
– Ex mb IIC T4 Gb
– Ex mb IIIC T130ºC Db
Incorrect use of the solenoid valve can be dangerous to people,
nearby equipment and the environment.
▶ The device type 6213 EV / 6281 EV is designed to control, shut off
and meter neutral media up to a viscosity of 21 mm2
/s.
▶ Provided the cable plug is connected and installed correctly, e.g.
Bürkert Type 2508, the device satisfies protection class IP65 in
accordance with DIN EN 60529 / IEC 60529.
▶ Use according to the permitted data, operating conditions and
conditions of use specified in the contract documents and operating instructions.
▶ In the case of explosion-proof devices (see rating plate or additional plate) also follow the operating instructions for the coil /
pilot control.
▶ Correct transportation, correct storage and installation and careful
use and maintenance are essential for reliable and problem-free
operation.
▶ Use the device only as intended.
Download Datasheet: Burkert Type 6213 Servo-assisted 2/2 Way Diaphragm Valve
Reference: Burkert-usa.com
Another Article:
- Norgren Integrated valve and actuator control (IVAC) Pneumatic
- 53-SY SMC Pneumatic Solenoid Valves – 5 Port
- Tokyo Keiki LFCG Pressure-temperature compensated flow control valves (with Check valve)
- Delta Elektrogas RFS Gas Pressure Regulators
- Tokyo Keiki DG4M4 Miniature Solenoid Directional Valves