Power Connectors HP Series- Amphenol

Power Connectors HP Series- Amphenol
Power Connectors HP Series- Amphenol

HP Series connectors are suitable for AC power supply where a latch locking connector is required. They are rated at 25 A / 250 Vac. Connectors are keyed and color-coded for power-in (Blue) and power-out (Grey).

Features:

  • Quick-release, vibration resistant latch lock
  • 3 pole
  • Screw Terminals or Solder Tab 3/16”
  • Chuck type cable clamp
  • 25A Current rating
  • Thermoplastic housing
  • Industry-standard mating
  • UL, cUL recognized components

Another Article:

Specification

GENERAL CHARACTERISTICS Number of contacts 2+PE
Termination Screw or Solder Tab 3/16”
Flammability UL94V-0
Environmental Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL CHARACTERISTICS Rated Operating Voltage 250VAC
Test Voltage AC RMS 3200V
Current carrying capacity 25A
Typical Contact Resistance ≤3mΩ
Insulation Resistance (initial) ≥2GΩ
Insulation Resistance (after damp heat test) ≥1GΩ
CLIMATIC CHARACTERISTICS Protection Class IP20
Operating Temperature -25˚C to +75˚C (-13°F to +167°F)
MECHANICAL CHARACTERISTICS Weight**
– Chassis Connector 12g (0.026lb)
– Cable Plug 32g (0.070lb)
Typical Cable retention force 200N (Subject to cable material and O.D.)
Cable O.D range
– Blue Chuck Clamp 5mm – 7.5mm (0.19” – 0.29”)
– Black Chuck Clamp 7.5mm – 15mm (0.29” – 0.59”)
Conductor Size
– Screw Terminals 2.5mm² (AWG14)
MATERIALS PA66 GF30 / Black
Insulators PA66 GF30
Cable Boot / Backshell Santoprene / PBT
Cable Clamp (Chuck) P.O.M
Contact Plug
– Material / Plating Brass / Silver
Contact Chassis
– Material / Plating Phosphor Bronze / Silver

Download Catalog: Amphenol Connector Catalog

Ref: Amphenol.com

Be the first to comment