UltraFlo™ UFD3 Ultrasonic Clamp-On, Flocorp-Flow Meter

UltraFlo™ UFD3 Ultrasonic Clamp-On Flow Meter
UltraFlo™ UFD3 Ultrasonic Clamp-On Flow Meter

Flow measurement provides a variety of application specific challenges because each has individual measurement requirements, restrictions, piping considerations, etc. FLO-CORP’s experienced team is second-to-none when providing expert flow advice on the correct meters for your application. Our team will help you navigate through the selection process if you are not sure which meter to use. Technologies offered include variable area, positive displacement, ultrasonic, magnetic, mass, and open channel flow meters.

The UltraFlo™ UFD3 ultrasonic flow meter is a fixed or portable, clamp-on flow meter that is easy to install, accurate, and simple to use. The UltraFlo™ UFD3 is equipped with intelligent software to ensure high accuracy and low-velocity response. The flow meter has the ability to be a fixed unit or portable unit. The UltraFlo™ UFD3 ultrasonic flow meter is widely used in applications such as oil and gas, water treatment, pure water, chemical, and much more.

Features and Benefits

  • Backlit bright LCD display
  • RS232/RS485 or Modbus communication
  • Portable or Fixed unit
  • Highly accurate and easy to install
  • Clamps onto pipe, requires no need to cut pipe
  • 5 year warranty

Specifications

 

PERFORMANCE

   

TEMPERATURE

Transmitter: -40º~140º (-40º~60º)

Transducer:-40º~176º (-40º~80º, standard)

 

FLOW RANGE

±0.09ft/s ~ ±40ft/s (±0.03m/s ~ ±12m/s)
 

HUMIDITY

 

Up to 99% RH, non-condensing

 

ACCURACY

±0.5% of reading (for ±1.5ft/s~±40ft/s)
 

PHYSICAL

REPEATABILITY 0.15% of measured value
TRANSMITTER IP65
LINEARITY ±0.5%
 

 

 

TRANSDUCER

IP68

Encapsulated design

Double-shielded transducer cable Standard/maximum cable length: 30ft/900ft(9m/274m)

 

PIPE SIZE

1” to 200” (25mm to 5000mm). Pipe size under 1” is an option
FUNCTION
 

 

 

OUTPUTS

Analog output: 4~20mA, max load 750Ù.

Pulse output: 0~9999Hz, OCT, (min. and max. frequency is adjustable) Relay output: SPST, max 1Hz,(1A@125VAC or 2A@30VDC)

 

Specifications are subject to change without notice.

 
COMMUNICATION RS232 & RS485
MEMORY TF card (Max 4G)
 

POWER SUPPLY

90 to 245 VAC, 48 to 63 Hz. Or 10 to 36VDC
DISPLAY 240*128 back lit LCD

Download Datasheet: UltraFlo™ UFD3 Ultrasonic Clamp-On Flow Meter

Ref: Flo-corp.com