Mercotac Two Conductor Electrical Connectors

Model 205

Two Conductors, 4 Amps

Mercotac Two Conductor Electrical Connectors
205
  • High-speed model available (205-H)
  • Low-torque/low-temp. models available (205-L)
  • Available with stainless steel ball bearing (205-SS)

Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque and low cost. Model 205 replaces the old model 590 for Leslie speakers and Hammond organs.

Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
205 2 0-250 4 200

<1mΩ

2000 140 (60) /45(7) 75

>25MΩ

205-SS 2 0-250 4 200

<1mΩ

2000 140 (60) /45(7) 75

>25MΩ

205-L 2 0-250 4 200

<1mΩ

1200 140 (60) /-20(-29) 20

>25MΩ

205-LS 2 0-250 4 200

<1mΩ

1200 140 (60) /-20(-29) 75

>25MΩ

205-H 2 0-250 4 200

<1mΩ

3600 140 (60) /45(7) 35

>25MΩ

205-HS 2 0-250 4 200

<1mΩ

3600 140 (60) /45(7) 35

>25MΩ

“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)
“L” designator indicates low torque / low temp.
“LS” designator indicates low temp. & stainless steel ball bearing
“H” designator indicates high RPM
“HS” designator indicates high RPM & stainless steel ball bearing

Model 205 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Model 230

Two Conductors, 30 Amps

Mercotac Two Conductor Electrical Connectors
230
  • Disconnects included (4 lg.)
  • Boot Kit available
  • Available with stainless steel ball bearing (230-SS)
Model No. Terminals Voltage
AC/DC
Amp
Rating
@240VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
230 2 0-250 30 200

<1mΩ

1800 140 (60) /-20(-29) 200

>25MΩ

230-SS 2 0-250 30 200

<1mΩ

1800 140 (60) /-20(-29) 200

>25MΩ

“SS” designator indicates stainless steel ball bearing  (recommended for wet or corrosive environments)

Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

    Another Article:

Model 235

Two Conductors, 2@30amps & 500V

Mercotac Two Conductor Electrical Connectors
235
  • Disconnects included (4 lg.)
  • Boot Kit available
  • Available with stainless steel
  • ball bearing (235-SS)
Model No. Terminals Voltage
AC/DC
Amp
Rating
@500VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
235 2 0-500 30 100

<1mΩ

1200 140 (60) /-20(-29) 400

>50MΩ

235-SS 2 0-500 30 100

<1mΩ

1200 140 (60) /-20(-29) 400

>50MΩ

“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Model 215-2K

Two Conductors, 2@15amps & 2,000V

Mercotac Two Conductor Electrical Connectors
215-2K
  • Disconnects included (4 lg.)
  • Boot Kit available
  • Available with stainless steel
  • ball bearing (215-2KSS)

Mercotac model 215-2K series is ideal for high-voltage, two-wire applications such as ultrasonic welding.

Model No. Terminals Voltage
AC/DC
Amp
Rating
@2000VAC
Max.
Freq.
MHz
Contact
Resistance
Max.
RPM
Temp
Max. F (C) /
Min. F (C)
Rotation
Torque (gm-cm)
Circuit
Separation
215-2K 2 0-2,000 15 100

<1mΩ

1200 140 (60) /-20(-29) 400

>50MΩ

215-2KSS 2 0-2,000 15 100

<1mΩ

1200 140 (60) /-20(-29) 400

>50MΩ

“SS” designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Reference : mercotac.com