Description
Bamo EF/EFC Level Electrodes for Wells is sent into a so-called reference electrode. When the liquid is in contact with the reference and the level electrode (trigger point), the current passes through the conductive liquid. This short circuit is detected by a relay ES 2001 that activates a contact to trigger an alarm (remote signal).
EF 16 electrode is a single contact electrode. EFC 16 electrode is a dual-contact electrode, the outer body is used as the reference. No needs to provide a special ground connection. Measuring current returns through the shield of the coaxial cable connected to the outer body.
Bamo EF/EFC Features
- Compact electrodes
- All stainless steel
- For conductive liquids
- Supplied with or without cable
Application
Due to their designs and small dimensions, theses electrodes are suitable for the control of the presence of fluid in wells (pump protection) as well as for level control in large reservoirs, barrages, etc
Bamo EF/EFC Specification
| Outer body | AISI 316 L |
| Electrode | AISI 316 L |
| Insulation | Delrin (Polyacetal) |
| Temperature limit | 100 °C |
| Fixture | Cable suspended |
| Dimensions | EF: Ø 16 x 130 mm (overall) |
| EFC: Ø 16 x 157 mm (overall) | |
| Mass | 70 g |
Download Data Sheet: Level Electrodes for Wells EF / EFC
Ref: bamo.eu
Other Article:
- Hengesbach Level Module for Installation in Level Probes Tyoe NM
- Takuwa Water Level Gauge Sensor
- Mac3 Float Level Switch
- Hengesbach Level Module NC1 Series
- Mechatronics Dizzi Fluid Level Sensor