Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31 Thru-beam sensor

Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31 Thru-beam sensor
OBE10M-R103-S2EP-IO-V31 Thru-beam sensor

The R103 series miniature optical sensors are the first devices of their kind to offer an end-to-end solution in a small single standard design — from thru-beam sensor through to a distance measurement device. As a result of this design, the sensors are able to perform practically all standard automation tasks. The entire series enables sensors to communicate via IO-Link. The DuraBeam laser sensors are durable and can be used in the same way as a standard sensor. The use of Multi Pixel Technology gives the standard sensors a high level of flexibility and enables them to adapt more effectively to their operating environment.

     Another Article:

Features

  • Miniature design with versatile mounting options
  • IO-link interface for service and process data
  • Various frequencies for avoiding mutual interference (cross-talk immunity)
  • Extended temperature range
    -40°C … 60°C
  • High degree of protection IP69K

Technical Data

System components
Emitter OBE10M-R103-S-IO-V31
Receiver OBE10M-R103-2EP-IO-V31
General specifications
Effective detection range 0 … 10 m
Threshold detection range 12.5 m
Light source LED
Light type modulated visible red light
LED risk group labelling exempt group
Diameter of the light spot approx. 65 mm at a distance of 1 m
Angle of divergence 3.7 °
Functional safety related parameters
MTTFd 462 a
Mission Time (TM) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Function indicator Yellow LED:
Permanently lit – light path clear
Permanently off – object detected
Flashing (4 Hz) – insufficient operating reserve
Control elements Receiver: light/dark switch
Electrical specifications
Operating voltage 10 … 30 V DC
Interface
Interface type IO-Link ( via C/Q = pin 4 )
IO-Link Revision 1.1
Min. cycle time 2.3 ms
Process data width Emitter:
Process data output: 2 Bit
Receiver:
Process data input: 2 Bit
Process data output: 2 Bit
Compatible master port type A
Output
Switching type The switching type of the sensor is adjustable. The default setting is:
C/Q – Pin4: NPN normally open / dark-on, PNP normally closed / light-on, IO-Link
/Q – Pin2: NPN normally closed / light-on, PNP normally open / dark-on
Signal output 2 push-pull (4 in 1)outputs, short-circuit protected, reverse polarity protected, overvoltage protected
Usage category DC-12 and DC-13
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/EC EN 60947-5-2:2007+A1:2012
Standard conformity
Product standard EN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Mechanical specifications
Housing width 15 mm
Housing height 43.9 mm
Housing depth 26.7 mm
Degree of protection IP67 / IP69 / IP69K
Connection M8 x 1 connector, 4-pin
Material
Housing PC (Polycarbonate)
Optical face PMMA

Download Datasheet: Pepperl+Fuchs OBE10M-R103-S2EP-IO-V31 Thru-beam sensor

Reference: pepperl-fuchs.com