Bamo Level On-Floor Leak Detector MAXIMAT LWC BX

Level On-Floor Leak Detector MAXIMAT LWC BX
Level On-Floor Leak Detector MAXIMAT LWC BX

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Level On-Floor Leak Detector MAXIMAT LWC BX

MAXIMAT LWC BX compact leak detectors are used to detect leakage or spread water polluting liquids. Due to the short detection height of liquid, about 1mm, even a small leakage quantity is reliably detected. The device is used for leakage detection of water polluting media.


  • All-plastic versions
  • Integrated transmitter and connection for test button
  • No moving parts
  • Floor leak detection
  • NPN / PNP interfaces


Leak detection in accordance with the German Water Resources Act (WHG) for retention basins and floors where are in use water-polluting, electrically conductive, non-flammable liquids.

Another Article:


Detection Capacitive high-frequency sensor, fail-safe detector
Ambient temperature -20 … +60 °C
Operating pressure Atmospheric; Limits: 0.8 to 1.1 bar
Housing head PBT, fiber-glass reinforced
Protection IP67 (not suitable for permanent immersion)
Power supply 15 … 27 V DC
Consumption < 1 W
Cable PVC, 6 m long; 5x 0.34 mm²
Outputs Potential-free Reed contact for low voltage (Normally
closed, it opens when alarm occurs)
Rated: Max. 50 V AC / DC, Max. 0.5 A, Max. 10 VA,
convenient for operating with a coupling relay or PLC,
signaling device TC4 / TC1 or CST unit.
2-wire alarm output reporting
with transmitter MAXIMAT SHR C
Note: Simultaneous use of both outputs is not possible.
Additional function Connection of an external test button (potential-free
contact), for a complete diagnostic of the device integrity
(connection loops, electronics).
Connection options Alarm units: MAXIMAT TC1 / TC4
Coupling relay: CST
Transmitter: MAXIMAT SHR C
Automation with PLC

Download Data Sheet: Level On-Floor Leak Detector MAXIMAT LWC BX