Description
KOBOLD plastic flow meters and switches model KSK are based on the well known suspended float principle. They are used for measuring and monitoring flows in closed pipes. The media flows, from below, through aconcial plastic measuring tube. This raises the flow rate can be read off against the scale. The instruments can be fitted with bi-stable switches. The use of high-quality material PVDF means that this type is very suited for service with corrosive media.
Applications
Flow metering and monitoring of liquid or gaseous products in vertically installed pipelines. The current flow rate in volume or mass per unit in time is shown
Special features
- Simple, robust and user-friendly design
- Material: PVC transparent
- Impact and shatterproof
- High chemical resistance
- Adjustable limit switches
Options
Limit switches KER1 and KER2-bistable.
Technical Data:
| Ranges: | Water: 20 °C, min: 5-60l/h, max:5.000-50.000 l/h | |
| Air:20 °C, 1,013 bar abs., min: 0,4-2,3 Nm³/h, max:165-1420 Nm³/h | ||
| Display: | Direct reading flow scale | |
| Accuracy class: ± 2% of the upper range value | ||
| Applications: | Metering of liquid products with suitable viscosity, free of solids, not clog, and do not tend to form deposits. | |
| Gases with linear flow characteristics and adequate inlet pressure. | ||
| Medium temperature: | 0°C up to +80°C (depends on temperature and material, details see relevant datasheet) | |
| Nominal pressure: | 16 bar max. (depends on temperature and material, details see relevant datasheet) | |
| All pressure data refer to liquids without danger potential and proper and stress-free installation of the equipment. | ||
Download Catalog: Model KSK, KSM, VKN Variable area – flowmeter plastic measuring tube
Ref: Heinrichs.com
Another Article:
- Differential Pressure Transmitter D32 Series Delta Mobrey
- LEEG Pressure Transmitter, Sensor and Switch
- D22 Pressure Transmitter Delta Mobrey
- 8000 SAN Pressure Transmitter Delta Mobrey
- Hengesbach Pressure Transmitter DME 11 Series