The iMAG-Series magnetic flow meter is the most economical flanged electromagnetic flowmeter on the market. With electrodes designed to discourage fouling. It is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications. (For 3” version, see iMAG 4600-300.). Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow.
iMAG-Series magnetic flowmeters are NSF-61 approved and are rated IP68 for applications where the meter may be operated underwater to a depth of at least 10 feet (3 meters) continuously. The display can be meter mounted or remote, and both rate and total indication are standard.
Rate and total units and pulse scaling can be set via the front panel touch keypad by the user. Bidirectional flow is standard with forward, reverse and net flow. A power/output cable allows outputs for use with a variety of Seametrics and other displays and controls for remote reading and telemetry applications.
The pulse output is standard on all models and 4-20mA passive current loop is standard on the iMAG 4700p. In addition, 4-20mA loop, HART protocol, high-speed digital, and Modbus® protocol outputs are optional on the externally powered units, depending on the model.
iMAG series Electromagnetic Flow Meter | Seametrics
iMAG 4700 ( Base Compact)
The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61
iMAG 4700P ( Premium Compact)
The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61 approved and are rated IP68 for applications where the meter maybe
iMAG4700r ( Remote)
The iMAG-Series are the most economical flanged electromagnetic flowmeters on the market. With electrodes designed to discourage fouling, it is available in 4” to 12” pipe in municipal or industrial water, waste and reclaimed water, pump stations, and packaged plant applications.
(For 3” version, see iMAG 4600-300.) Minimal straight pipe requirements allow iMAG-Series meters to be used in piping configurations where there is little space between the meter and an elbow. iMAG-Series meters are NSF-61 approved and are rated IP68 for applications purpose.
Contact us : sales@wmablog.com or visit to our E-Commerce
Other Article:
- Seametrics iMAG 4700 Series Electromagnetic Flow Meter
- Magnetic Flow Meter iMAG Series Seametrics
- iMAG Series Electromagnetic Flow Meter
- Flow Meter Ultrasonic Jenis Clamp On Untuk Pipa PVC
- Harga Coriolis Mass Flow Meter
- Perlunya Resetting dan Kalibrasi Flow meter secara berkala
- Jenis Flow Meter Berdasarkan Prinsip Kerja dan Aplikasinya
- Penentuan Kapasitas Flow Meter Pada Aliran Air
- Flow Meter Ultrasonic Clamp on untuk Proses Destilasi Air Laut
- Flow Meter Ultrasonic Portable untuk Mengecek Sistem Pendingin Mesin
- Penggunaan Flowmeter Ultrasonic Pada Pengolahan air limbah
You must be logged in to post a comment.