Plugs & Jacks, Amphenol-Musician Series II Plugs

Musician Series II Plug and Socket
Musician Series II Plug and Socket

The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms.

Features:

  • Mono or Stereo (TRS).
  • Stylish shell design.
  • Robust diecast shell in Satin nickel or Black finish.
  • Nickel or Gold contact plating.
  • Flexible grommet cable protection.
  • Improved solderability.
  • Precision machined contacts.
  • Standard or Bulk packaging.
  • Cable OD Entry to 6.5mm (0.256”)

Options:

  • Black Shell,
  • Gold contacts.

Another Article:

Specifications :

VALUE
GENERAL CHARACTERISTICS Number of Contacts 2 Pole (Mono) 3 Pole Tip Ring Sleeve (Stereo)
Termination Solder, PCB or Combo
Flammability rating of insulating plastics UL94V-0
Solderability, complies with IEC 68-2-20
Environmental Complies with EU RoHS 2 Directive 2011/65/EU
ELECTRICAL CHARACTERISTICS Current Carrying Capacity 10A (Depends on Mating Connector and Cable)
Typical Contact Resistance ≤10mΩ
Insulation resistance (initial) >2GΩ
After Damp Heat Test ≥10³ Meg Ω
Rated Voltage 34V
Test Voltage AC RMS: Dielectric Strength 500V
CLIMATIC CHARACTERISTICS Protection Class IP40
Operating Temperature -25ºC to +70ºC (-13ºF to 158ºF)
MECHANICAL CHARACTERISTICS Insertion and Withdrawal Force ≥10N – ≤30N
Mating Cycles Min. of 1000 cycles without any physical damage
Weight
– Straight 18g (0.039lb)
– Right Angle 25g (0.055lb)
MATERIALS Connector Housing Nylon PA66 30% Glass Filled
Metal Nut Brass
Plastic Nut Nylon PA66 30% Glass Filled
Washer Fiber / Brass / Nylon PA66 30% Glass Filled
Contact Plating Tin – 4µm Min. over 2µm Min.Cu (Copper)
Silver – 0.3µm Min. over 2µm Min.Cu (Copper)
Nickel – 2µm Min. over 2µm Min.Cu (Copper)
Gold Flash – 0.05µm Min. over 2µm Min.Cu (Copper)
Contacts Brass / Sn (Tin) over Cu (Copper)

Download Catalog: Amphenol Connector Catalog

Ref: Amphenol.com

Be the first to comment