RMG TRZ 03 Turbine Gas Flow Meter

Description

The RMG TRZ03 series is an excellent representation of a proven and mature technology that is widely used throughout the natural gas industry due to its good price-performance ratio. The first generation was approved by PTB in 1993. Since then the meters have always exceeded the requirements of the relevant international standards.

The RMG TRZ03 is used both in the pipeline networks of the transport companies (TSOs) and in the transfer stations of the distribution network operators (DSOs) when high measuring accuracy for custody transfer operation, short inlet distances, robust and low-maintenance devices are required. In addition to the classic mechanical roller counter and the electrical pulse outputs, the meter can optionally be equipped with an encoder for serial transmission of the meter reading.

RMG TRZ 03 Turbine Flow Meter serves to calculate the flow rate of natural gas, butane, propane, nitrogen, air, acetylene, and other gaseous matters used in various technological processes (gas flow meter). It consists of the following components: body, measuring element (located on the body), and counting mechanism.

A flow straightener located upstream of the measuring element of  RMG TRZ 03 Turbine Meter directs the gas onto the turbine blades. The turning number is proportionate to the average speed of movement of the operating environment and, therefore, to its flow.

The rotary motion generated by the turbine wheel is transmitted by a magnetic coupling to the meter head. Thereafter, the speed, which is proportional to the flow rate, is reduced by gearing and converted into the measured volume by choosing a needed pair of gear wheels. As a result, the obtained data is shown on the counting mechanism. High accuracy of measurements is ensured.

Gas Flow Meter
Gas Flow Meter

Device for Custody-transfer Metering

  • Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon inquiry;
  • Special design for aggressive gases is available;
  • Mechanical counter head for continuous registration and display of total volume without electrical power supply;
  • High measuring accuracy;
  • Gas may flow horizontally or vertically;
  • Optionally with mechanical drive shaft;
  • TRZ 03E without mechanical counter – with electronic connection for computers.

Spesification :

  • Max. admissible pressure PS 100 bar
  • Max. admissible pressure Pmax up to 100 bar
  • Meter sizes G 65 to G 16000 (from Qmax 100 m³/h to Qmax 25000 m³/h)
  • Measuring range max. 1: 50
  • Connection DIN flange PN 10, PN 16, PN 25, PN 40, PN 100 and Flanges according to ANSI 150, ANSI 300, ANSI 600 in DN 50, DN 80, DN 100, DN 150, DN 200, DN 250, DN 300, DN 400, DN 500, DN 600

Size and performance data

Meter sizeNominal diameterOverall lengthMax. Max. operating pressureMax. Flow rate
DN(flange to flange)pmaxQmax
in mmin barin m³/h
G 6550150100100
G 10080240100160
G 16080240100250
100300
G 25080240100400
100300
G 400100300100650
150450
G 6501504501001000
G 10001504501001600
200600
G 16002006001002500
250750
G 25002507501004000
300900
G 40003009001006500
4001200
G 6500400120010010000
5001500
G 10000500150010016000
6001800
G 16000600180010025000

More Information: Brochure TRZ 03

Other Article:

author

Rudy Wiratama

rudywinoto.com/wmablog.com/flowmasonic.com

Similar Posts

Discover more from Indonesia Industrial Parts

Subscribe now to keep reading and get access to the full archive.

Continue reading