These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.
Features and Benefits
- Material combining HNBR and fluoro rubber used for superior resistance to
- Prevents ingress of cutting oil from moving sections.
- Fluororesin cable that withstands cutting oils is provided as
- Models available with Smart click connectors for easy connection.
- Minute load model with gold cladding is optimal for electronic
- Approved by EN (TÜV).
- Same mounting pitch as D4E-N
- IP67G degree of protection (JIS C 0920 Annex 1).
Degree of protection
|IP67 (IEC 60529) and IP67G (JIS C 0920 Annex 1) *1
Passed OMRON’s Oil-resistant Component Evaluation Standards *2 (Cutting oil type: specified in JIS K 2241:2000; Temperature: 35°C max.)
|Mechanical||4,000,000 operations min.|
|Electrical||500,000 operations min. (Standard load: 1 A at 30 VDC, resistive load/Micro load: 0.1 A at 30 VDC, resistive load) 4,000,000 operations min. (10 mA at 24 VDC, resistive load)|
|Operating speed||0.1 mm/sec to 0.5 m/sec|
|Operating frequency||Mechanical: 120 operations/min
Electrical: 30 operations/min
|Insulation resistance||100 MÙ min. (at 500 VDC) *3|
|Contact resistance||Standard load : D4ER-1@@@N@: 15 mÙ max. (initial value for the built-in switch whentested alone) Micro load : D4ER-2@@@N@: 50 mÙ max. (initial value for the built-in switch whentested alone)|
|Between terminals of same polarity||1,000 VAC, 50/60 Hz for 1 min|
|Between each terminal and noncurrent-carrying metal part||1,500 VAC, 50/60 Hz for 1 min/Uimp at 2.5 kV (EN 60947-5-1)|
|Rated insulation voltage (Ui)||250 V|
|Pollution degree (operating environment)||3 (EN 60947-5-1)|
|Short-circuit protective device (SCPD)||10 A fuse (type gG or type gI, IEC 60269 approved)|
|Conditional short-circuit current||100 A (EN 60947-5-1)|
|Conventional enclosed thermal current (Ithe)||5 A (EN 60947-5-1)|
|Protection against electric shock||Class II (grounding not required with double insulation)|
|Vibration resistance||Malfunction||10 to 55 Hz, 1.5-mm double amplitude|
|Shock resistance||Destruction||1,000 m/s2 max. (IEC 68-2-27)|
|Malfunction||300 m/s2 max. (IEC 68-2-27)|
|Ambient operating temperature/Ambient storage temperature||5°C to 70°C (with no icing or condensation)|
|Ambient operating humidity||35% to 95%RH (with no condensation)|
|(in case of roller plunger)
Cable type (2 m): Approx. 140 g
Pre-wired Connector type: Approx. 103 g
1. The following values are initial values.
2. The following ratings may vary depending on the model. Contact your OMRON representative for further
*1. The IP67G is the degree of protection which is defined according to the JIS (Japanese Industrial Standards).
The IP67 indicates the same level of protection as defined by the IEC, and the G indicates that a device has resistance to oil.
*2. The Oil-resistant Component Evaluation Standards are OMRON’s own durability evaluation standards.
The Pre-wired Connector type meets the degree of protection when it is correctly connected with an XS5@R Oil-resistant Connector. The degree of protection is not satisfied with the part where there is no XS5FR Oil-resistant Connector connected and cable wires are uncovered. And as for the Cable type, the degree of protection is not satisfied with the part where cable wires are uncovered.
*3. This value represents the condition when the Switch is shipped from the factory.
Download Catalog: Environment-resistant Series