E2EQ, Omron-Spatter-resistant Proximity Sensor

E2EQ, Omron-Spatter-resistant Proximity Sensor
E2EQ, Omron-Spatter-resistant Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Features and Benefits

  • Superior spatter
  • Long Sensing-distance Models added for sensing distances up to 15
  • Pre-wired Smart click Connector Models are also

Specifications

Long Sensing-distance Models

Model

Item

E2EQ-X4X1

E2EQ-X4X1-M1(T)J

E2EQ-X8X1

E2EQ-X8X1-M1(T)J

E2EQ-X15X1

E2EQ-X15X1-M1(T)J

Sensing distance 4 mm ±10% 8 mm ±10% 15 mm ±10%
Set distance *1 0 to 3.2 mm 0 to 6.4 mm 0 to 12 mm
Differential travel 15% max. of sensing distance
Standard sensing object Iron, 12 ´ 12 ´ 1 mm Iron, 18 ´ 18 ´ 1 mm Iron, 30 ´ 30 ´ 1 mm
Response frequency *2 1 kHz 0.5 kHz 0.25 kHz
Control output Load current 3 to 100 mA
Residual voltage *3 5 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing object approaching) Load ON: NO; For details, refer to the timing charts on page 5.
Protection circuits Load short-circuit protection, Surge suppressor
Ambient temperature range Operating: -25 to 70°C, Storage: -40 to 85°C, (with no icing or condensation)
Temperature influence ±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistance Destruction: 1,000m/s2 10 times each in X, Y, and Z directions
Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
Weight (packed state) Pre-wired Models Approx. 65 g Approx. 140 g Approx. 190 g
Pre-wired Connector Models Approx. 20 g Approx. 40 g Approx. 90 g

Common Ratings and Performance

Model

 

Item

E2EQ-X4X1 E2EQ-X4X1-M1(T)J

E2EQ-X3D1 E2EQ-X3D1-M1(T)GJ

E2EQ-X8X1 E2EQ-X8X1-M1(T)J

E2EQ-X7D1 E2EQ-X7D1-M1(T)GJ

E2EQ-X15X1 E2EQ-X15X1-M1(T)J

E2EQ-X10D1 E2EQ-X10D1-M1(T)GJ

Detectable object Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Power supply voltage (operating voltage range) 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current 0.8 mA max.
Indicators Operation indicator (red), Setting indicator (green)
Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
Insulation resistance 50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC for 1 min between current-carrying parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
 

 

Materials

Case Fluororesin coating (Base material: brass)
Sensing surface Fluororesin
Clamping nuts Fluororesin coating (Base material: brass)
Toothed washer Zinc-plated iron
Accessories Instruction manual

Standart Model 

Model

Item

E2EQ-X3D1 E2EQ-X3D1-M1(T)GJ E2EQ-X7D1 E2EQ-X7D1-M1(T)GJ E2EQ-X10D1 E2EQ-X10D1-M1(T)GJ
Sensing distance 3 mm ±10% 7 mm ±10% 10 mm ±10%
Set distance 0 to 2.4 mm 0 to 5.6 mm 0 to 8 mm
Differential travel 10% max. of sensing distance
Standard sensing object Iron, 12 ´ 12 ´ 1 mm Iron, 18 ´ 18 ´ 1 mm Iron, 30 ´ 30 ´ 1 mm
Response frequency * 1 kHz 500 Hz 400 Hz
Control output Load current 3 to 100 mA
Residual voltage 3 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing object approaching) Load ON: NO; For details, refer to the timing charts on page 5.
Protection circuits Load short-circuit protection, Surge suppressor
Ambient temperature range Operating/Storage: -25 to 70°C (with no icing or condensation)
Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence ±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Connection method E2EQ-X@D1: Pre-wired Models (Standard cable length: 2 m)

E2EQ-X@D1-M1GJ: Pre-wired Connector Models (Standard cable length: 300mm)

Weight (packed state) Pre-wired Models Approx. 120 g Approx. 160 g Approx. 220 g
Pre-wired Connector Models Approx. 80 g Approx. 110 g Approx. 190 g

Download Catalog: E2EQ, Omron-Spatter-resistant Proximity Sensor

Ref: Omron.co.id