Skimoil Oil Water Separators and Separation

Skimoil Oil Water Separators and Separation was established in 1990 and  learned a lot! All SkimOIL products are quality made in the USA. Skimming and separation equipment sales and consulting.

About Skimoil Oil Water Separators and Separation

SkimOIL systems are built to specifically address your particular problem and concerns, through the use of our existing specialty, unique and innovative equipment or technologies that can be used right off the shelf or modified, configured, or otherwise packaged, to fit your needs.

​SkimOIL, LLC is a specialty design/custom manufacturer-builder, and distributor of marine and industrial pollution control equipment and systems. They specialize in all types of industrial oil skimmers and oil water separators. With just a few exceptions almost everything we do touches on oil somehow. ​In addition to our “on the shelf” equipment, what you’ll find here is our made-to-order SkimOIL equipment, or our “Separator Systems” or “BRUTE” series of hardened commercial marine and industrial wastewater treatment equipment and systems.

The Products of Skimoil Oil Water Separators and Separation

​SkimOIL, LLC is a specialty design/custom manufacturer-builder, and distributor of marine and industrial pollution control equipment and systems. their serve a product:

• Floating Oil Skimmers
• Different Types of Oil Skimmers
• Skimmer Systems
• Oil Water Separators
• Marine Equipment
• Evaporators
• Oilsmart Systems
• Diesel Fuel Purifier Filter
• Portable Incinerators
• Oil Detection
• Floating Tank Decanter

Floating Weir Oil Skimmer

These are free floating on the surface of the water, put it where you want it to pull in floating oil, debris, plastic, duckweed, algae, and anything else that floats, and is flowable. The FWS is connected to a hose connected to a pump on the shoreside. Your pump or vacuum system pulls suction from the skimmer sump (Camlock coupler or flanged outlet). With only one moving part, the hinged weir this one is hard to screw up. Works great with a vac truck or AOD pump or hose pump but will give you a LOT of water to deal with when you’re getting close to the interface.

Very portable. Flow rates from 10-1500 GPM. It’s automatically self-adjusting and flow control. Never needs manual adjustment…EVER. You could take this skimmed product and run it into a separator or tank, and decant water back to the pit/tank. This skimmer is actually powered by your suction pump and it works with ANY pump that can pull suction.

Floating Drum Oil Skimmer

These sit right in the water — and are very well-engineered, rugged heavy duty skimmers in sizes that start off weighing about 100 lbs. (with hose) and can skim from 20 to over 100 gallons per minute when they are in heavy oil. This is the tool of choice for heavy skimming. Dimensions from 2 x 3′ to 3 x 8′. Can even have an onboard pump. These will move a LOT of oil fast.

These can be air drive (your compressed air), BUT the hydraulic drive systems (electric or diesel powered) are way more powerful — and will actually pull a whole pond’s worth of contiguous oil right into the skimmer. Of course, the hydraulics cost more, but oh do they work GREAT! Entry level $5K. A variety of pumps could be used to pump the oil from the sump. We can furnish it as a whole dedicated Oil Spill Response packaged skimmer system, with pump and hoses with quick, connects, etc.

Belt Oil Skimmer

These are fixed and mounted in one location — and work well when the oil is touching the belt, BUT no touch, no skim! Being motor driven they lift the oil from the surface to the wipe-off blades/scraper. Then the oil flows by gravity to some type of receptacle for transfer to? If you have to lift the oil very high, it does allow some oil to run back down the belt before it gets to the top where the wiper/scraper blade is.

And so it goes. But, eventually, you do get the oil. Belt sizes from 1-8″ wide and lengths to 100′ ft. are available with multiple heads (belts) with recovery rates to 50 GPH or more. Electric powered usually. Very reliable equipment — the belt is the consumable item here. This is a SELECTIVE skimmer and will give you little water to deal with.

Rop Mop Wringer Oil Skimmer

These are fixed and mounted in one location and air or electric motor driven. With a vertical-to-horizontal pulley system to reach across an area like a scale pit and pull oil from the other side (also fixed), this can remove a LOT of oil. The mop looks like a squirrel tail with lots of little hairs, which means a lot of surface area.

The mop is pulled and squeezed by at least 2 rubber rollers It will pick up a lot of oil but is maybe NOT the best choice when there are a lot of abrasive solids in the oil. The solids can chew up the rope mop and the squeeze rollers. This is one of the oldest skimming technologies, but very reliable equipment.

Tube Oil Skimmer

​These are fixed and mounted in one spot but can be on a boom arm to reach out and grab oil. They have an oil-attracting tube (like a hose) with relatively little surface area, and if you’re lifting high, the oil can run down the hose/tube.

But, eventually, you do get it. Snakes the tube down onto the water surface where it attracts oil to it. Reliable equipment. Electric motor drive. Low flow — to maybe 60 GPH.

Source: www.skimoil.com

Read More Articles :

• Abanaki Oil Skimmer for Industrial Wastewater
• Drizit Oil and Chemical Pollution Control
• Disc Oil Skimmer High Capacity With Power Pack
• King Nice KN-1 Floating Oil Removal skimmers for CNC Machine
• Small Oil Skimmer NC-22
• Industrial Oil skimmer JF-50
• Fungsi dan Jenis Oil Skimmer