flow measurement adalah alat ukur untuk debit atau aliran fluida baik air, gas maupun udara yang terdiri dari flow sensor dan flow transmitter
The FMG series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters are MID approved and fully comply with EN12480 and OIML R137.
The FMG series of rotary gas meters are designed to meet the highest demands of reliable and accurate measurement of gas flow. The meters are MID approved and fully comply with EN12480 and OIML R137.
The FMT-Lx series turbine meter is a robust meter, designed to perform on the highest level of accuracy. The meters comply with all international standards and approved to custody transfer.
Meteran air atau water meter adalah Meteran yang digunakan untuk mengukur aliran air PAM atau PDAM. Meteran air pdam harus ber sni dan di terra oleh badan metrology indonesia
GKM Helix 4000 designed for measuring bulk forward and reverse flows of cold potable water for revenue billing in commercial or industrial applications and distribution system monitoring.
The IWM-PL4 is suitable for remote reading applications in commercial and industrial sectors, acting as an electronic pulse-emitter. The IWM-PL4 is compatible with all the pre-equipped Woltmann meters
The IWM-PL3 is suitable for remote reading applications in commercial and industrial sectors, acting as an electronic pulse-emitter. It allows the acquisition of the consumption of the counter
The RFM-TXE module transmits via radio the lecture data of 1 or 2 meters equipped with pulse output device. This allows to transmit via Wireless M-BUS the data acquired by the meters
The flow meter has the ability to be a fixed unit or portable unit. This flow meter is widely used in applications such as oil and gas, water treatment, pure water, chemical, and much more.
It is a great choice for monitoring a variety of air or gaseous applications, features solid-state switching, and is extremely reliable even under the harshest environmental conditions.
Offered in general purpose and hazardous proof configurations, this compact flow switch is a great choice for monitoring a diverse range of liquid applications, with Maintenance-free.
This flow switch is a highly precise, compact industrial instrument. The CFSG3 works according to the calorimetric principle which is evaluated by using microprocessor technology.
It is consists of two main components – the MEMFlo flow meter and the FloSentry 3™ switch assembly. Floetry 3™ is a single or dual alarm setpoint, It is reliable single or dual alarm
It is extremely reliable even under the harshest environmental conditions. NitroFlo features a repeatable alarm, an adjustable set-point from 3 to 32 feet per second, and an LED indication of flow. T
Flow transmitters are typically bundled with flow meters resulting in maximized performance. Flow transmitters transmit the flow value data in order to monitor the application or system.
It is designed to transmit a safe fiber optic signal, allowing the incorporation of flow meters into fully charged electrostatic systems, which compatible with FLO-CORP’s PDFlo Positive Displacement.
It is simple, accurate, meters for use in a wide range of industrial liquid and gas applications. These meters have excellent tolerance to suspended solids and measure flow to one percent accuracy.
It is a two-wire flow transmitter that accurately calculates and outputs the flow rate. which compatible with any MEMFlo variable area flow meter. It is proved variable area technology.
it is offered in liquid and gas configurations, a great choice for a diverse range of flow services. Liquid examples include hydraulic oil, grease, solvents and dirty fluids including mild slurries.
It is simple, accurate, meters for use in a wide range of industrial liquid and gas applications. These meters have an excellent tolerance to suspended solids and measure flow to one percent accuracy.
It is accurate variable area meters and resistant to many acids, alkalis, salt solutions, and other corrosives. These meters has excellent tolerance to suspended solids and measure flow.
The PDFlo™ PDTX3 is a three-wire, meter mounted flow transmitter that is well-suited for a variety of remote monitoring applications. Microprocessor-based, the PDTX3 delivers fast and linear response.
It is a two-wire, meter mounted flow transmitter that is compatible with most PDFlo flow meters. It is used in a wide variety of applications where ease of operation and flexibility are required.
This devices are a single hall effect sensor that is compatible with PDFlo Positive Displacement Flow Meters. This sensor detects the rotation of the flow meter’s gears and emits.
It is affordable and accurate, which feature is the ability to maintain consistent accuracy despite changing viscosity conditions. This reliability, coupled with a large turndown range.
It is compatible with most PDFlo flow meters. A large, back-lighted LCD graphic display provides an easy to read indication of flow rate or total in user-programmable engineering units.
The RFM-TX1 WMBUS radio module is a radio module suitable for the water consumption data radio transmission applicable to the single jet GSD8-RFM water meters. It is easy to install and configure
It is a fixed or portable, clamp-on flow meter that is easy to install, accurate, and simple to use, this equipped with intelligent software to ensure high accuracy and low-velocity response.
It is the ideal flow meter with accurate, digital doppler technology. It is offered in a portable flow meter design or permanent mount installation. Both are extremely rugged, reliable and durable.
It represents the logical evolution matching modern microprocessor intelligence with over 30 years of thermal flow expertise. Its patent-pending auto-self-calibration, and temperature solution.
This industrial purpose flow meter is a great choice for monitoring a diverse range of air or gaseous applications. The CalFlo™ CFAF is encapsulated in epoxy resin and operates with NO moving parts.
It is an inline thermal mass air flow meter that will accurately measure and control a variety of gaseous media. CFAM features solid-state sensing, adjustable measuring range, LED output display, etc.
The CFHM is field adjustable and provides a 4-20 mA output for monitoring low flow rates, it is a self-contained, thermal mass liquid flow meter that is ideal for measurement and control applications.
The MAGFLO™ Magnetic Flow Meter is ideal for most liquid process applications such as pulp and paper, agricultural, chemical, water, wastewater, oil and gas, and OEM applications.
It is a great choice for a variety of measurement and control applications. Completely encapsulated in epoxy resin,it features solid-state sensing with proven reliability and long-term stability.
Copyright © 2009 Indonesia Industrial Parts