Erdco Flex-Flo 700
Articles

Erdco Flow Measurements and Level Meters

ERDCO Engineering Corporation has supplied the Process, Environmental, Water Treatment & HVAC Industries with flow measurement also Variable Area, Rotameter, Turbine & Thermal Dispersion Type Flowmeters.

Erdco Flex-Flo 700
Flow Indicator

Erdco Flex-Flo 700

The meter is a simple and rugged flow rate indicator for transparent fluids. It is well adapted for applications that fall within standardized flow ranges at moderate pressures and temperatures.

No Picture
Flow Indicator

Erdco Armor-Flo 3600

Armor-FloTM meters with integral transmitters provide an ideal combination – a local mechanical flow rate indicator independent of electrical supply with a 4-20 mA two wire loop powered signal output.

Erdco Armor-Flo 3500
Flow Indicator

Erdco Armor-Flo 3500

The design of the switch is to capture the indicator, preventing movement until the flow rate is once again within the acceptable range. This switch is appropriate for use in Class 1, Division 2 areas

Erdco Armor-Flo 3400
Flow Indicator

Erdco Armor-Flo 3400

Measure liquid, gas or steam flow rates in horizontal or vertical pipelines. Armor-FloTM meters handle fluids that cannot be measured with the See-Flo® due to clarity, pressure or compatibility

Erdco See-Flo® 3200
Flow Indicator

Erdco See-Flo® 3200

See-Flo® Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs.

Erdco See-Flo® 3100
Flow Indicator

Erdco See-Flo® 3100

See-Flo® sight flow indicators show you at a glance, the color, clarity and flow of liquids in process lines. The large tempered glass window permits easy observation of fluid conditions

No Picture
Flow Indicator

Bamo Variable Area Glass Flow Indicators E Series

The E Series are variable area flow indicators, the diver (”float”) moves inside a calibrated conical tube. Flow indicators may be calibrated according the fluid properties and operating conditions

No Picture
Flow Indicator

Bamo Orifice Plate Flow Indicator U6 Series

The Bamo model orifice plate flow indicators U6 are specifically designed for the measurement of high flow rates. U6 Series are suitable for pipes with a diameter equal or over 2″.

No Picture
Flow Indicator

Bamo Small Plastic Flow Indicator PDP

Bamo is a company that comes from France. PDP flow indicator applies the principle of variable area flow-meter: the flow raises a diver in a conical tube expanding the cross section of fluid passage.

No Picture
Flow Indicator

Bamo Plastic Flow Indicator IDP

The Flux IDP Plastic Flow Indicator use the principle of variable area flow-meter: the fluid flow raises a diver in a conical tube, expanding the cross section of the passage of fluid.

No Picture
Flow control

Bamo Flow Controller with Indicator, Metallic DUG

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros and company that comes from France. DUG controls and visualizes the flow in a pipe of a fluid free of suspended particles.

No Picture
Display, Indicator, Control

Fluidwell F111 Dual Input Flow Rate Indicator

The F111 incorporates 2 flow rate/totalizers in one enclosure, including a pulse output for each flow. There is no relationship between the flows, even different pulse signal input types can be used.

No Picture
Display, Indicator, Control

Fluidwell F011 Flow Totalizer Indicator

The F011 is a local indicator which displays the running total and accumulated total simultaneously. Total can be reset to zero by pressing the CLEAR button twice.

No Picture
Flow Indicator

Mecon Tubux M30 Universal Float-type Flow Meter

Tubux M30-type flow meters are suitable for measuring clear liquids and gases. In Tubux M30’s structural design, glass measuring cone is protected by a stainless steel pipe with an integrated window.

No Picture
Display, Indicator, Control

KEP Meter ST1-SUM-FC Rate/Total Flow Computer

ST1-SUM-FC Flow Computer can monitor the actual sum of two flow rates and two totals of any liquid. Flow alarms are provided via relays & data logging is available via 4-20mA & serial outputs.

No Picture
Display, Indicator, Control

Fluidwell D013 DIN Panel Mount Totalizer

The D013 is a versatile, panel mount flow rate indicator and totalizer with continuous flow rate monitoring feature. It offers the facility to set one low flow rate and one high flow rate alarm value.

No Picture
Display, Indicator, Control

KEP meter Flow Computers

A flow computer is a special-purpose device that computers a corrected flow based on information derived from raw input signals and stored sensor and fluid properties information.