The KYTOLA® Variable Area Flow Meter Model E is a high quality flow meter made from clear acrylic. It is a reliable and easy-to-read instrument for measuring and monitoring liquid and gas flows.
Variable area flow meter Model BA is a high quality acrylic flow meter. It is designed for monitoring of low air flow rates. It has a flow adjustment valve and rapid fittings for plastic hose.
The Flux IDP Plastic Flow Indicator use the principle of variable area flow-meter: the fluid flow raises a diver in a conical tube, expanding the cross section of the passage of fluid.
KOBOLD is one of the leading international instrumentation engineering enterprises. They provides several kinds of variable area flow meter such as: plastic low flow, class cone, and many more
A true thermal mass flow meter, RedyCompact is for those that want the highest accuracy and repeatability and need a drop-in replacement for a Rotameter. RedyCompact is easy to read from a distance.
High temperature flow meters are available for air, water, and oil flow measurement with maximum temperature of 600°F.
Bi-Directional Flow Meter is ideal for monitoring pump performance as well as measuring fluids in hydraulic circuits and cooling systems where flow is measured in both directions.
Case Drain Flow Meter is a low cost alternative for monitoring pump performance and identifying required maintenance.
The proven KOBOLD flowmeters and switches model SMV are based on the principle of the well-known float type flowmeters except for the conventional tapering measuring tube.
Inside the flow tube, there is a star guided float which works towards a spring. An annular gap is produced between the cone-shaped magnet system and the meter ring in case of flows other than zero.
The KOBOLD-BGN meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.
The variable-area flowmeter consists of a stainless steel device with an integrated conical stainless steel measuring tube and a vertically movable float.
KOBOLD flowmeters and monitors of model SWK operate on the known suspended float principle, however without using the generally known conical measuring tube.
The KDS meter is suitable for flow measurement of liquid or gaseous products in pipes.
It shows the current flow rate in volume or mass per unit in time.
The KOBOLD flowmeter model UTS works on the basis of the suspended float principle. It comes with a M18x1.5 connection.
Kobold Variable Area Flowmeter Switch V31 is used for flow metering, dosing, monitoring, and control of liquid and gas media in pipes.
Kobold provides many kinds of Class Cone Variable Area Flowmeter such as; Thread Connection URM; Class Cone URB; Class Cone UVR/UTR; Loose Flange URL; and Fixed Flange URK
The flowmeters and switches for very low flows model KDF-9, KDG-9, KDF-2, and KDG-2 for liquids and air operate on the suspended float principle
The KOBOLD flow switch types SVN and KSR operate on the known suspended float principle of measurement and are suited for liquids and gases.
The KOBOLD plastic flowmeters of model KSM are based on the float principle with the float moving freely without friction in the measuring tube.
KOBOLD plastic flowmeters and switches model KSK are based on the well known suspended float principle. They are used for measuring and monitoring flows in closed pipes.
The KOBOLD flowmeter model KFR operates on the proven suspended float system, that is, the installation position is vertical and the flow is from bottom to top.
The flowmeter and switch for very low flows model KSV for liquids or air operates on the suspended float principle.
The LAKE Basic Inline Variable Area flow meter is ideal for monitoring pump performance and oil or water flows through hydraulic circuits and cooling systems.
The RK1935 Series rotameter has been developed for compact alarm switches. It is a compact flowmeter for small equipment panel designs.
Kofloc RK120X Multiple Rotameter is a multiple flow meter with a needle valve that is made by combining several types of flow meter for controlling various flows in a laboratory.
The easy-to-handle RK1360 Series for laboratory use is ideal for high-precision measurement and control of very small flow.
These compact reed switch flowmeters developed centering the focus on cost reduction are for monitoring gas and liquid flows. Any of these models is optimum for process control of cooling water.
Kofloc RK1400 flowmeter particularly features its uniquely precision-formed glass tube and ultra-precision ball float.
Kofloc RK145 flowmeter particularly features its uniquely precision-formed glass tube and ultra-precision ball float.
Tubux M30-type flow meters are suitable for measuring clear liquids and gases. In Tubux M30’s structural design, glass measuring cone is protected by a stainless steel pipe with an integrated window.
A small purge meter made of SUS304 / SCS. Ideal for device assembly. FLO-PL-40D designed for Liquid (water, cooling water, etc.) and Gas (AIR, N2, CO2, Ar, etc.) wth scale range 10: 1.
The small and simple flow meter MF-100 is compact and suitable for incorporation into equipment. Alarm contact can be installed.
FLO-70 is a high-precision area-type flow meter that can read the instantaneous flow rates of various liquids and gases directly from the scale indicated by the float, for laboratories.
A high-precision area-type flow meter that can directly read the instantaneous flow rate of various liquids and gases from the scale on the glass tube indicated by the float.
See-Flo 3200 Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids
sight flow indicators show you at a glance, the color, clarity and flow of liquids in process lines