Level Compact Overfill Detector MAXITOP
level meter

Bamo Level Compact Overfill Detector MAXIMAT CX

The Level Compact Overfill Detector MAXIMAT CX compact overfill detectors are level limit switches which are used to prevent overfilling of containers with water polluting liquids.

Level Leak Detector MAXITOP LW C
level meter

Bamo Level Leak Detector MAXITOP LW C

The detector MAXITOP LW C is designed to detect the presence of liquids (acids, alkalis) with a reactance below 5 kOhm and a coupling capacitance towards ground of more than 50 pF.

Level Compact Overfill Detector MAXITOP
level meter

Bamo Level Compact Overfill Detector MAXITOP

Detector MAXITOP is designed to prevent overfilling of tanks. It detects conductive liquids (acids, alkalis) with a reactance below 5 kOhm and a coupling capacitance towards ground of more than 50 pF.

Level 1 Channel Alarm Unit MAXIMAT TC1-B
level meter

Bamo Level 1 Channel Alarm Unit MAXIMAT TC1-B

MAXIMAT TC1-B is an optical and audible alarm unit for dry-contact detectors. The built-in buzzer provides local alarm to the operator and the LED inform visually on the alarm status.

Level 1 Channel Alarm Unit MAXIMAT TC1
level meter

Bamo Level 1 Channel Alarm Unit MAXIMAT TC1

MAXIMAT TC1 is a signaling unit for overfill&leakage detectors MAXIMAT and MAXITOP. Detector is powered directly by TC1 unit. Audible alarm is acknowledged through the push-button on the right side.

Level Leakage Detection Sensor MAXIMAT LW VK
level meter

Bamo Level Leakage Detection Sensor MAXIMAT LW VK

The sensor MAXIMAT LW VK is designed to detect conductive liquids non-electrically conductive. The detection results from the position of a magnet inside the float and a Reed contact inside the probe.

Level Measuring Transducer MAXIMAT SHR CS
level meter

Bamo Level Measuring Transducer MAXIMAT SHR CS

This power supply and alarm signal relay SHR CS (DIN rail mounting) is specially designed for the new MAXIMAT leakage and overfill transmitters and liquid filling of pipes sensors CAPSYTRON SFL.

Level Compact Overfill Sensor MAXIMAT VK C
level meter

Bamo Level Compact Overfill Sensor MAXIMAT VK C

Transmitter Level Compact Overfill Sensor MAXIMAT is designed to detect conductive liquids non electrically conductive. Detection results from position of a magnet inside the float&a Reed contact.

No Picture
Articles

TE Water-Level Sensors

TE Connectivity (TE) is a leader in monitoring water usage and water quality. From analog to digital, standard to custom design, our water level sensors easily adapt to any data system.

Magnetic Level Controller MNR 7/4074
level control

Bamo Magnetic Level Controller MNR 7/4074

Magnetic Level Controller MNR 7 / 4074 has a magnetic equipment, a guiding stem with built-in Reed contact, fitting and head housing. Magnets are all covered by PTFE, non-porous quality.

Magnetic Level Controllers MNR 6
level control

Bamo Magnetic Level Controllers MNR 6

Magnetic level controllers MNR 6 reed contacts are adjusted at factory according requested trigger points; They are actuated by the magnetic float. Wet parts are in PVC, PPH, PVDF or stainless steel.

Magnetic Float Level Controller MNR 7 Ex
level control

Bamo Magnetic Float Level Controller MNR 7 Ex

Internal wiring is done on a screw terminal. On the lower end of guide tube, a blocking ring allows to take off the float before to fit the guide tube through a small diameter hole.

Magnetic Level Controllers MNR 7
level control

Bamo Magnetic Level Controllers MNR 7

The Magnetic Level Controllers MNR 7 Reed contacts (up to 4) inside the stem, are actuated directly by the magnet float. Wet parts (stem and float) to choose between: or PVC & PP, or PP, or PVDF.

Level Floor Leak Detector WM25
level meter

Bamo Level Floor Leak Detector WM25

Level floor leak detectors WM25 are used for monitoring water leaks in rooms and retention basins. The sensor detects non-aggressive and electrically conductive liquids such as water.

Relay for Resistive Level Detection ES 5000
level control

Bamo Relay for Resistive Level Detection ES 5000

The Bamo’s model relay for resistive level detection ES 5000 works with the electrical conductivity property of the liquid, detecting the opening or closing circuit between two electrodes.

Resistive Level Probes STS
level control

Bamo Resistive Level Probes STS

The Resistive Level Probes STS level probe with a relay ES 2001, detects a level of a conductive liquid. The current in detection loop provoques through the relay ES2001, an amplified ON/OFF signal.

Level Electrodes for Wells EF / EFC
level control

Bamo Level Electrodes for Wells EF / EFC

EF 16 electrode is a single contact electrode. EFC 16 electrode is a dual-contact electrode, the outer body is used as the reference. No needs to provide a special ground connection.

Resistive Level Probes TVI & MINITEV
level control

Bamo Resistive Level Probes TVI & MINITEV

Bamo is a company that comes from France. Electrical connection: with end tip to the terminal. A ground connection is available inside the housing IP55. Fitting is AISI 316 L with PTFE insulator(s).

Floor Leak Detection BES 680
level control

Bamo Floor Leak Detection BES 680

The BES 680 resistive level detector, associated to a resistive relay, detects the variation of resistor value caused by the presence of a conductive liquid between two electrodes.

Resistive Level Probe STE
level control

Bamo Resistive Level Probe STE

STE level probe in combination with a relay ES2001 detect level of electrically conductive liquids. Up to 5 levels may be triggered provide a reference electrode if tank is made of insulating material

Resistive Level Detector RXM 2851
level control

Bamo Resistive Level Detector RXM 2851

RXM detects difference of resistance between detection electrode and the reference electrode when the liquid comes into contact. Reference can be the wall of the metal container or a second electrode.

Resistive Level Controller ES 2001
level control

Bamo Resistive Level Controller ES 2001

Probes and electrodes are specially designed for different type of applications. ES2001 is used as a limit value detector on conductive liquids; Probes and rods are chosen according to the application

Level Controller SNR 4
level control

Bamo Level Controller SNR 4

Level controller SNR 4, affords a dirt liquid as far as this one does not clog the measuring tube. Thresholds are adjustable. Pressure variation acts on a diaphragm that directly activates a contact.

Level Controller With Stop Valve VAFLO
level control

Bamo Level Controller With Stop Valve VAFLO

The VAFLO regulates automatically, the high level of water, without power supply. The system is simply mechanical: When the level rises, the float causes the closure of the water inlet nozzle.

Side Level Controller CNL
level control

Bamo Side Level Controller CNL

Level controller CNL, consists of float fixed to shaft which end has: magnet on metal models or magnetic float on PPH models. Float is moved by liquid&magnet acts on reed contact isolated from liquid.

Magnetic Float Level Switch NIVOMAG
level meter

Bamo Magnetic Float Level Switch NIVOMAG

The Magnetic Float Level Switch NIVOMAG is a compact 316 stainless steel switch. The variety of both the top and side mounted versions makes it easy to install the switch in any tank at any location.

Float Level Detector NIVOSTOP® / ACS
Float Level

Bamo Float Level Detector NIVOSTOP® / ACS

Operating principle is same as for other float level detectors NIVOSTOP® with built-in counterweight. With rising level float tilts&actuates switch (output cable has to be connect to control cabinet)

Float Level Detector NIVOSTOP® PR2-H05
Float Level

Bamo Float Level Detector NIVOSTOP® PR2-H05

Operation of NIVOSTOP® PR2-H05 is identical to other detectors NIVOSTOP® with a built-in counterweight. When the level is rising up, the tilting of the float actuates an integrated switch.