The Level Dry Run Protection CAPSYTRON TLS is designed for empty tube detection. It avoids hammer effects when filling a tank. In no case should liquids form insulating or conductive deposits.
Designed for the monitoring of hydrocarbon fluids separators, the alarm device NIVOIL may be connected to 1, 2 or 3 sensors. The 3 sensors may be connected to any input of the alarm device NIVOIL.
The Magnetic Float Level Switch NIVOMAG is a compact 316 stainless steel switch. The variety of both the top and side mounted versions makes it easy to install the switch in any tank at any location.
NIVOSTOP SS2 float switches are designed for level control in tanks and basins. Cigar-shaped type is for insertion in tank with hole of diameter 30 mm, for instance through wall or the top of the tank
Level signalling of the medium having minimum density 3 0,70 g/cm. The basic version, mounted from the top, is available with 92x92mm flange connector, head made from aluminium alloy
Float level switches are used for point level detection of liquids in all type of vessels. Level switches are available with floats in two sizes: Ø64.5 x 130mm or Ø52 x 162mm).
The LLS 4000/4000U liquid level switch is designed to detect the state (gas or liquid) of the refrigerant in front of the sensing head, while installed in a wide range of refrigeration applications.
It can be used in almost every industrial application without regard to the target material. This compact sensor is used around the world on remote liquid level systems, heavy equipment, etc.
It designed for level and distance measurement in remote monitoring and other difficult outdoor applications. The features surge protection which assures reliable performance in lightning prone areas.
The adaptive signal and automatic echo detection & the control provide effortless and accurate level measurements in one non-contacting transmitter. It makes mounting into a standard tank nozzle.
The switches are configurable as either “PNP” or “NPN” type. Each has an adjustable set point, hysteresis, window, initial conditions, ON delay, OFF delay, and loss of target response.
It is a universal level switch for liquids. It reliably detects level within millimeter precision of installation position. It can be used as an empty or full detector, as overfill protection, etc.
An ideal instrument for accurate point level detection in solids. When the vibrating rod is immersed in the product, the vibration frequency change is detected by the integrated electronics.
An ideal instrument for accurate point level detection in liquids. It will detect the change in its natural resonant frequency which is driven by an internal piezoceramic element inside the sensor.
APLISENS S.A. is one of the leading manufacturers of high quality process instrumentation. From the beginning it has concentrated on electronic pressure & differential pressure measurement technology.
It is designed for an indication of the presence of (conductive or non-conductive) liquids in the glass. The sensitivity and switching mode can simply be set up using the “programming” wire.
The point level devices includes : Float Switches Pulsar Point Level Devices, Pulsarpoint 300 and 310 Pulsar Rotating Paddle Switch, and Pulsarpoint 200 Series Pulsar Vibrating Level Switches
One of the product that come from Hengesbach is level measuring. The maintenance-free Liquitec series consists of liquid level switches for use in an EX-free operating environment.
The KOBOLD flow monitor types PSE and PSR are simple, reasonably-priced and reliable monitors of fluid motions.
Pulsarpoint 200 Series is a vibrating level switch for bulk solid applications. When solids material comes into contact with the vibrating probe, the frequency of oscillation changes.
Pulsarpoint 310 is a rotating paddle level switch for level measurement and switching on bulk solids. The Pulsarpoint 310 has a diecast aluminium housing sealed to IP66
Pulsarpoint 300 is a rotating paddle level switch for level measurement and switching on bulk solids.
The proven flowmeters and switches model DSV are based on the principle of the well-known float-type flowmeters except for the conventional tapering measuring tube.
The Mobrey 003 switch is designed for high or low level alarm duties.
The paddle switch may be used as either a high or low level limit switch.
These level switches can be optionally supplied mounted vertically in chambers, in a sealed or removable form.
The vibrating rod level switch is the perfect solution for single point level switching in free flowing solids across a wide density range, from fine powders to grains.
Mobrey float level switches are rugged, robust, and trusted globally for their long-term reliability in the harshest of environments and the most hazardous areas.
The Hydratect electronic water and steam detection system is designed as an electronic alternative to conventional water level switches for steam raising plant.
The level regulator is a float switch that allows electrical equipment to start and stop automatically (usually pumps, but also solenoid valves, alarms, etc.) when a prefixed level has been reached.
The most essential characteristic of these products is its high reliability and its shape which no edges for which it is particularly suitable for Water, Sewage, and dirty water.
The new generation of PS858 sensors was developed in close coordination with the users. Its modern and userfriendly design stands out. High overload protection and best accuracy.
Feature: Sensitivity can be easily adjusted using an internal high strength spring. Since the structure is simple, troubles occur rarely and maintenance is easy. Easy handling and wiring
The FL Seriesis a range of vertically mounted, single float level switches operating on the proven reed switch and magnet principle.
Level Sensor or Level Control or Level Tank or Level Meter products are tools to measure the height of a or some material(s).