APG DDL Series Large Digital Display is an analog-input panel meter with 2.80” digits, and multiple outputs and display options. With two configurable, six-character lines and four LED alarm indicators, the DDL makes a lot of information easily visible from long distances.
The DDL is easily programmed with the four buttons below the display or through a USB connection to a PC. Easily read your display from any distance. Two lines of 2.80″ characters and four LED alarm indicators, on a Sunlight Bright display.
Easy to Program
With four push buttons below the display for programming in place and a USB port for connection to a PC running MeterView Pro software, setting up the DDL is simple.
Every DDL has a polycarbonate-glass blended front face that is rated NEMA 4X, IP65, for long-lasting life in tough environments.
The DDL can read a variety of current and voltage inputs, plus one digital input, and control up to four SPDT output relays and an isolated 4-20 mA output.
APG DDL Series Features
- 2-line, 6-character display
- Environmentally sealed face; NEMA 4X / IP65
- Easy 4-button programming
- Current Inputs: 4-20 or 0-20 mA
- Voltage Inputs: 0-5, 1-5, 0-10 VDC
- 1 Digital Input / Input Contact
- Current Output: Isolated 4-20 mA
- Relay Outputs: 0 or 4 SPDT Relays
- Up to 200 mA for powering sensor
- Configurable High/Low alarms
- Alternating Pump Control (with output relays)
APG DDL Series Specification
|Display||2 lines, 6 characters each, 1.80″ tall|
|Display Update Speed||200 ms (5 updates per second)|
|Accuracy||± 0.03% of calibrated span|
|Supply Voltage||VAC: 85 – 265|
|VDC: 12 – 24|
|Input Impedence||Voltage Inputs: > 500 kΩ|
|Current Inputs: 50 – 100 Ω|
|SPDT Relays||3 A @ 30 VDC / 125/250 VAC resistive loads|
|1/14 HP (≈ 50 W) @ 125/250 VAC resistive loads|
|Input Contact/Digital Input||Contact Voltage: 3.3 VDC|
|Digital Input Logic High: 3 – 5 VDC|
|Digital Input Logic Low: 0 – 1.25 VDC|
|Default Logic: Normally Open/Low|
Download Data Sheet: Large Digital Panel Meter DDL