Description
Hengesbach DSA 9648 Digital Display for panel-installation has been designed for standard signals 0/4…20 mA or 0…+10 V DC. The device offers an integrated transmitter supply for direct connection of 2- an 3 wire transmitters for e.g. pressure or temperature. The connection of potentiometers is possible as well. Indicating range and decimal point are free programmable in the range of ± 99990 (fixed zero selected).
Hengesbach DSA 9648 Digital Display Features:
- For standard signals 0/4…20 mA or 0…10 V
- Indicating range and decimal point free programmable
- Optional with max. 4 outputs, spdt relays or transistor
- Led-display, 14,2 mm
- Display range ± 9999(0) digits
Specification:
General information | |
Device | Digital-display for signal-input DSA 9648 |
Application | Displaying of standard-signals for pressure, temperature, … |
Input | |
Current input | 0/4…20 mA; Ri = 10 Ω |
Voltage input | 0…10 V DC; Ri = <100 k Ω |
Potentiometer | 0…1 kΩ/100 kΩ |
Accuracy | < 0,1% ±2 digit |
Temperature coefficient | 0,004%/K |
Transmitter-supply | U0 ca. 24V, Ri ca. 150 Ω, max. 50 mA (max. 25 mA at 4 relay-outputs) |
Display | |
Range | ± 9999(0) digit leading zero suppression |
Parameter display | LED 2-digit red, 7 mm (parameter- and output indicator) |
Output | |
Relay | SPDT<250VAC<250VA<2A,<300VDC<50VA<2A |
Transistor | max. 35 V AC/DC max. 100 mA, short circuit protected |
Analog output | 0/4…20 mA burden ≤ 500 Ω; 0/2…10V burden > 500 Ω, isolated, |
automatic output changing (burden dependent) | |
Accuracy | 0,1%; TK 0,01 %/K |
Operating-conditions | |
Operating temperature | -10…+55 °C |
Auxiliary energy | |
Supply voltage | 230 V AC ± 10%; 115 V AC ± 10%; 24 V AC ± 10 % or 24 V DC ± 15% |
Power consumption | max. 2,5 VA, with analog output 5 VA |
Rated voltage | 250 V~ acc. VDE 0110 between input/output/supply voltage |
degree of pollution 2, over-voltage categoric III | |
Test voltage | 4 kV=, between input/output/supply voltage |
CE-conformity | EN55022, EN60555, IEC61000-4-3/4/5/11/13 |
Design configuration | |
Panel case | DIN 96×48 m, material PA6-GF; UL94V-0 |
Dimensions | Front 96×48 mm, mounting depth 100mm |
Weight | max. 390 g |
Electrical connection | Clamp terminals, 2 mm² single wire, 1,5 mm² single wire, AWG14 |
protection | IP 65, terminals IP 20, fingersafe acc. German BGV A3 |
Download Data Sheet: Digital Display for Signal Input DSA 9648
Ref: Hengesbach.com
Other Article:
- Hengesbach DSA 1010 Digital Display
- Bamo TS 11 Temperature Probe with Pt 100 Ω Sensor
- Hengesbach Digital Temperature Transmitter TE 42
- Hengesbach TE 32 Digital Temperature Transmitter
- SP Loudspeaker, Amphenol-Connectors