Flo-corp CAIM Connex Compatible is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect to each other. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.
The Analog Input/Output Module for the CONNEX 3D™ Flexible Meter provides the input from a variety of standard analog inputs such as flow, level, pressure, temperature, pH, and analytical inputs to standard field instruments and measurements. Analog input modules offer superior isolation and filtering for input and output to meet integrated system monitoring solutions.
High data integrity for scalable measurements facilitates conversion to serial RS-485 digital communications using MODBUS RTU (Master & Slave) on three isolated communication ports. Easy plug-in connection to the CONNEX 3D™ Digital Display Module (CDDM), CONNEX 3D™ Pump and Relay Control Module (DXM1), CONNEX 3D™ TCP/IP Ethernet Module (C485), CONNEX 3D™ Data Logger and Cellular Modem Module (CELL) and CONNEX 3D™ Radio Module (CDRM) for high performance wired or wireless monitoring.
Flo-corp CAIM Connex Compatible Specification
|ANALOG INPUT MODULE|
|ANALOG INPUTS||Up to 4 channels|
|ISOLATION||Complete Analog Out|
|I/O MODE||Voltage & Analog – Current|
|INPUT RANGE||4 to 20 mA|
|0.1%FSR @25 C, 0.5%FSR@-40 and|
|SAMPLING RATE||1.5 samples / sec|
|BUILT-IN RESISTOR FOR CURRENT INPUT||240 ohms|
|POWER REQUIREMENTS||10-28 VDC|
|ANALOG OUTPUT||4-20mA isolated output|
|TRANSMITTER POWER SUPPLY||10 to 30 VDC or|
|90 to 240 VAC 50/60 Hz|
|INTERFACE||2 RS-485 with 3-wire terminal blocks|
|STOP BITS||1, 2|
|BAUDRATE||9600 to 921600|
|PROTOCOLS||Modbus RTU (Master, Slave)|
|Specifications are subject to change without notice.|
Download Datasheet: Flo-corp Analog Input Module CAIM CONNEX COMPATIBLE