Flo-corp CAIM Connex Compatible Analog Input ModuleIndonesia Industrial Parts

Flo-corp CAIM Connex Compatible is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect to each other. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.

The Analog Input/Output Module for the CONNEX 3D™ Flexible Meter provides the input from a variety of standard analog inputs such as flow, level, pressure, temperature, pH, and analytical inputs to standard field instruments and measurements. Analog input modules offer superior isolation and filtering for input and output to meet integrated system monitoring solutions.

High data integrity for scalable measurements facilitates conversion to serial RS-485 digital communications using MODBUS RTU (Master & Slave) on three isolated communication ports. Easy plug-in connection to the CONNEX 3D™ Digital Display Module (CDDM), CONNEX 3D™ Pump and Relay Control Module (DXM1), CONNEX 3D™ TCP/IP Ethernet Module (C485), CONNEX 3D™ Data Logger and Cellular Modem Module (CELL) and CONNEX 3D™ Radio Module (CDRM) for high performance wired or wireless monitoring.

Flo-corp CAIM Connex Compatible Specification

ANALOG INPUT MODULE
ANALOG INPUTS	Up to 4 channels
ISOLATION	Complete Analog Out
RESOLUTION	12 Bits
I/O MODE	Voltage & Analog – Current
INPUT RANGE	4 to 20 mA
INPUT RANGE	0.1%FSR @25 C, 0.5%FSR@-40 and
ACCURACY	75 C
SAMPLING RATE	1.5 samples / sec
BUILT-IN RESISTOR FOR CURRENT INPUT	240 ohms
POWER REQUIREMENTS	10-28 VDC
ANALOG OUTPUT	4-20mA isolated output
TRANSMITTER POWER SUPPLY	10 to 30 VDC or
TRANSMITTER POWER SUPPLY	90 to 240 VAC 50/60 Hz
SERIAL	2
INTERFACE	2 RS-485 with 3-wire terminal blocks
PARITY	Non-Fixed
DATA BITS
STOP BITS	1, 2
BAUDRATE	9600 to 921600
PROTOCOLS	Modbus RTU (Master, Slave)
Specifications are subject to change without notice.