Description
Flo-Corp CDRM Radio Module Connex Compatible is a wireless I/O monitoring solution that solves vast numbers of industrial automation challenges using point-to-point radio communications. Never trench or run conduit and wires again. The savings of hardware and installation cost is significant and will provide fast, reliable remote monitoring and control/alarm to the CONNEX 3D™ monitoring solution.
The CONNEX 3D™ is a revolutionary concept in the process instrumentation market. It is flexible, versatile, and adaptable due to the variety of modules that connect. Think of the modules like Legos®, pick and choose from a wide variety of options that plug into your CONNEX 3D to create a unique system to fit your exact needs.
Flo-Corp CDRM Radio Module Features and Benefits
- Replicate raw signals in either direction
- No software or programming required
- Easily mounts on 35 mm DIN raiils
- Class I, Div 2 (Zone 2)
- -40ºF to 176ºF (-40º to 80ºC)
- 900 MHz or 2.4 GHz radio operation
- Secure AES encryption
- 5-year warranty
Specification
| FREQUENCY | 902-928 MHz or 2.4 GHz |
| License-Free ISM Band | |
| ANTENNA CONNECTOR TYPE | SMA (Female Connector) |
| DEFAULT TRANSMIT SPEED/ UPDATE | 1 Second |
| TURBO TX SPEED BASED ON NUMBER OF I/O MODULES | =100 ms, 2-3=200 ms, 4= 250 |
| ms, 5-6=333 ms, 7-11=500 ms, | |
| 12-16=1 second | |
| OUTDOOR/LINE OF SIGHT MAX RANGE2 | 900 MHz: 6.3 Miles (10.1 Km) |
| 2.4 GHz: 5.7 Mile (9.2 Km) | |
| INDOOR/URBAN RANGE | 900 MHz: 1000 ft (305 m) |
| 2.4 GHz: 300 ft (90 m) | |
| MAXIMUM TRANSMIT POWER (ADJUSTABLE WITH ADVANCE UI) | 900 MHz: 24 dBm (250 mW) |
| 2.4 GHz: 18 dBm (63 mW) | |
| RECEIVER SENSITIVITY | 900 MHz: -101 dBm / 2.4 GHz: |
| -100 dBm | |
| SPREAD SPECTRUM | 900 MHz: FHSS / 2.4 GHz DSSS |
| RF SECURITY | 128-bit AES Encryption |
| CONTROLLED LOCAL SHUTDOWN(ESD) | Yes, via Provided Dry Contact Input |
| RF LINK ALARM DIGITAL OUTPUT | Adjustable 2 to 10-Second RF Timeout Trigger (NPN) |
| I/O LINK ALARM DIGITAL OUTPUT | I/O Mismatch, Bus or Module Failure (NPN) |
| RF LINK DIAGNOSTICS (LEFT LED) | Green = RF Traffic / Yellow = RF Link Fail |
| I/O LINK DIAGNOSTICS (RIGHT LED) | Green = I/O OK, Modules Detected / Red = I/O Link Fail |
| SUPPLY VOLTAGE RANGE | 9 – 30 Vdc ( 5 %) |
| REVERSE POLARITY PROTECTION | Yes |
| ADVANCED USER INTERFACE FEATURES | Test RSSI, Tx Power Adjustment, Force Local Output(s), Set Fail-Safe Parameters, and Additional Diagnostics |
| POWER CONSUMPTION | 35 mA @ 12V AVG (10% Duty Cycle) |
| Specifications are subject to change without notice. | |
Download Datasheet: Radio Module (CDRM) CONNEX COMPATIBLE, Flocorp-Monitor
Ref: Flo-corp.com
Another Article:
- McCROMETER Ultra Mag Electromagnetic Flow Meter
- McCROMETER SPI Mag Electromagnetic Flow Meter with Procomm Converters
- McCROMETER FPI Mag Electromagnetic Flow Meter
- Litre Meter Electromagnetic Flowmeter Range and Ultrasonic Flowmeter
- Signet 2580 FlowtraMag® Meter