Flo-corp DXM1 eXmod Relay Expansion

Flo-corp DXM1 eXmod Relay Expansion

Flo-corp DXM1 eXmod Relay Expansionis a 4-relay output module that connects to select Universal Process Displays via RS-485 serial communication (4-wire). The eXmod is extremely versatile and can be mounted locally or remotely to allow for a purely distributed system. Display(s) can be mounted in the plant or control panel, while the eXmod can be mounted in the motor control cabinet for reduced cost of control wiring. Additionally, the eXmod’s BIG 10 AMP AC/DC rated relays bring added value to your control/alarm monitoring/ batching systems.

Flo-corp DXM1 eXmod Features & Benefits

  • Relay Setpoint for Rate or Total
  • Auto or Manual Reset of Relay – Latching or Non-Latching
  • Relay Logic or Pump Alternation
  • Can Be Used as a Batch Controller
  • NEMA 4X Enclosure
  • Expands Capabilities of Universal Process Displays
  • Increase Wiring Flexibility
  • Stocking Efficiencies
  • Economical Solution

  Another Article:

Specification

Status Indicators (4) Red LED Relay Indicators
User Interface 4 internal DIP Switches Used To Select ModBus® Address
Contact Form SPDT
Relay Rating 5A @ 28 VDC; 5A @ 120/240 VDC at
Max Ambient Temperature;
NO Contact Rated at 10A @ 20˚C
Operating Temperature F: -40º to 149º
C: -40º to 85º
Storage Temperature F: -40º to 149º
C: -40º to 85º
Relative Humidity 0-90%, non-condensing
Supply Voltage  12-24 VDC
Connection Removable Screw Terminal; Accepts 12-22 AWG Wire
Enclosure Type Panel/Field Mount
Enclosure Rating NEMA 4X (IP65)
Enclosure Material Polycarbonate
Classification General Purpose
Display Compatibility DigaCom 2000™ and DigaTouch™
Universal Process Displays Only

Download Datasheet: eXmod™ DXM1 Relay Expansion Module, Flocorp-Monitor

Ref: Flo-corp.com

Share