Description
Fluidwell F490 Loop Powered is a versatile, loop powered Multi Purpose Indicator to display the actual process value, range and loop current.? Besides the focus on level, temperature and pressure applications, the F490 can also work with other measuring units, like %, mA, RPM and more. The measuring unit to be displayed is simply selected through an alfa-numerical configuration menu.
The configuration of Span, offset and number of decimals is done through software functions, without any sensitive dip-switches or trimmers. Therefore, the F490 is a versatile indicator that suits many applications. Various options are available, including Intrinsic Safety for hazardous area applications.
The input circuit is separated from the backlight circuit. The F490 accepts 4 – 20mA input signals from a wide range of process instruments, including flow (linear or square root), level, pressure and temperature transmitters. All these process parameters can be displayed in their own engineering units.
Fluidwell F490 Loop Powered Advantages
- Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X) .
It is so rugged, a truck can even stand on it! - Intrinsically Safe available – ATEX, IECEx and CSA approval for gas and dust applications.
- Familiar easy operation with the Fluidwell “Know one, know them all” configuration structure, saving time, cost and aggravation.
- Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
Features
- Universal loop powered indicator.
- Input signal: 4 – 20mA with ultra low voltage drop < 1V DC.
- Displays the actual value, measuring unit and loop current.
- Very large 26mm (1″) high digits.
- Selectable on-screen engineering units: L – NL – mL – M³- AM³ – NM³ – mg – g – Kg – TON- OZ- GAL – USGAL – IGAL – lb – bbL- cf – CUFt – scf – p – rev – °C – °F – °K – % – M – mm – CM – mtr – inch – Ft – SQFt – Yd – PSI – psig – mbar – MbARG – bar – barg – bara – PA – PAG – KPA – KPAG – MPA – INHG – mmHg – mmH2O – MH2O – INH2O- Ph – mV – mA – A – uS – PPM – RPM or no unit.
- Selectable on-screen time units for flow rate:
/SEC – /S – /MIN – /M – /HR – /H – /DAY – /D or no unit. - Number of digits for actual value: 5½.
- Piegraph indication: ten segments.
- LED backlight with separated circuit from the input circuit.
- Intrinsically safe according ATEX, IECEx and CSA C-US.
- GRP, Aluminum or high grade stainless steel enclosure.
- Auto backup of settings in EEPROM memory.
- Easy configuration with clear alphanumerical display.
- Ambient temperature: -30°C to +70°C (-22°F to +158°F).
- Various accessories are available for this product.
Applications
- Applications where a local, loop powered, general / multi purpose display is required without monitoring function, linearization or signal re-transmitting.
- The F490 takes operating energy from an input current (2-wire 4 – 20mA) and has a separated backlight circuit.
- The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -30°C to +70°C (-22°F to +158°F).
Specification
Signal Inputs
Multi Purpose Inputs
- 4 – 20mA input loop-powered with ultra low voltage drop < 1V DC.
Signal Outputs
Alarm outputs
- None.
Analog outputs
- None.
Supply
Power Supply
- 4 – 20mA input loop-powered with ultra low voltage drop < 1V DC.
Sensor Supply
- None.
Hazardous Area
Intrinsically Safe
- ATEX:
Gas: II 1 G Ex ia IIC T4 Ga
Dust: II 1 D Ex ia IIIC T100°C Da - IECEx:
Gas: Ex ia IIC T4 Ga
Dust: Ex ia IIIC T100°C Da - CSA:
IS Class I/II/III, Division 1, Grps. A/G
Ex ia IIC / Class 1 Zone 0 AEx ia IIC T4
- ATEX:
Explosion Proof
- ATEX:
Gas: II 2 G / Ex d IIB T5 Gb
Dust: II 2 D / Ex t IIIB T100°C Db
- ATEX:
Communication
- Modbus communication available on F1-Series products.
- HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.
Download Datasheet: Fluidwell F490 Multi Purpose Indicator
Other Article:
- Fluidwell F490 Loop Powered Multi Purpose Indicator
- Fluidwell F Series Flow Display and Level Control
- Cartridge Fuse General Duty Safety Switch
- Fluidwell Display, Indicator, Totalizer, and Batch Control for Flow and Level Meter
- Fluidwell B Series Basic Flow Indicator
- Fluidwell D Series DIN Panel Mount Flow Indicator
- Battery Powered Flow Rate Transmitter RT-10 Series AW Lake
- KEPmeter ST1-MANIFOLD-FC-2 Channel Manifold Controller
- Hengesbach Level Module NC1 Series
- Fluidwell E Series Explosion Proof
- Fluidwell N Series Batch Controller
- Flow Computer, Batch Control, Flow Indicator and Level Indicator Fluidwell
- Fluidwell E series Flow Rate Indicators and totalizers upgrade