Description
KEPmeter MS-716 Vehicle & Skid Mount Flow Totalizer is a special version of the SUPERtrol-1 Flow Computer which is supplied in a vehicle mount enclosure. The MS-716 satisfies the instrument requirements for a variety of flowmeter types in liquid applications. Multiple flow equations and instrument functions are available in a single unit with many advanced features. The alphanumeric display shows measured and calculated parameters in easy to understand format. Single-key direct access to measurements and display scrolling is supported.
The versatility of the MS-716 permits a wide measure of versatility within the instrument package. The various hardware inputs and outputs can be “soft” assigned to meet a variety of common application needs. The user “soft selects” the usage of each input/output while configuring the instrument.
The isolated analog output can be chosen to follow volume flow, corrected volume flow, mass flow, temperature, or density using a menu selection. Most hardware features are assignable by this method. The user can assign the standard RS-232 Serial Port for data logging, transaction printing, or for connection
to a modem for a remote meter reading. A Service or Test mode is provided to assist the user during start-up system checkout by monitoring inputs and exercising outputs and printing system setup.
KEPmeter MS-716 Vehicle & Skid Mount Flow Totalizer Features
- Vehicle-Mount Enclosure; Rugged AluminumConstruction
- Class I, Div II Option Available
- Provisions for Sealing
- “EZ Setup” Guided Setup for First-Time Users
- Rate/Total and Batching Functions
- Menu Selectable Hardware & Software Features
- Universal Viscosity Curve (UVC) and API Eq.
- Advanced Batching Features: Overrun Compensation, Auto batch Start, Print End of Batch, Slow Fill, 2 Stage Batching
- Isolated Outputs Standard
- RS-232 Port Standard, RS-485 Optional
Advanced Printing Capabilities
Windows™ Setup Software - On-Board Data Logging
- DDE Server & HMI Software Available
- Enhanced Modem Features for Remote Metering
- Quick Batching Sequence with Automatic Ticket Printing
KEPmeter MS-716 Vehicle & Skid Mount Flow Totalizer Specifications
Flow Meters and Computations
- Meter Types: All linear and square law meters supported
- including Coriolis, vortex, turbine, magnetic, PD, target,
- orifice, venturi, v-cone, and many others
- Linearization: Square root, 16-point table, or UVC table
- Computations: Volume, Corrected Volume & Mass
- Fluid Computations: Temperature, Density, Viscosity and
- API 2540 for petroleum.
Environmental
- Indoor Use
- Altitude up to 2000m
- Operating Temperature: 0°C to +50°C (-20°C to 55°C optional)
- Storage Temperature: -40°C to +85 C
- Maximum Relative Humidity: 80% for temperatures up to 31°C decreasing linearly to 50% RH at 40°C
- Mains supply voltage fluctuations not to exceed ±10%of the nominal voltage
- Transient overvoltage according to INSTALLATION CATEGORY II (see UL 3101-1 Annex J)
- POLLUTION DEGREE 2 by IEC 664 (see 3.7.3)
- Materials: UL, CSA, VDE approved
- UL Class 1 Division 2 (optional)
Listing
- UL/ULC Listed (File No. E192404), CE Compliant
Display
- Type: 2 lines of 20 characters
- Types: Backlit LCD or OLED
- Character Size: 0.2” nominal
- User-programmable label descriptors and units of measure
Keypad
- Keypad Type: Membrane Keypad with 16 keys
- Keypad Rating: Sealed to NEMA 4X / IP65
Enclosure
- Size: See Dimensions
- Seal: NEMA4X
- Materials: Aluminum
Real-Time Clock
The MS-716 is equipped with a battery-backed real-time clock with a display of time and date. Format:
- 12 or 24-hour time display
- Day, Month, Year date display
Power Input
The factory-equipped power option is internally fused. An internal line-to-line filter capacitor and MOV are provided for added transient suppression.
- 110 VAC Power: 85 to 127 Vrms, 50/60 Hz
- 220 VAC Power: 170 to 276 Vrms, 50/60 Hz
DC Power:
- 12 VDC (10 to 14 VDC)
- 24 VDC (14 to 28 VDC)
- Power Consumption:
- AC: 11.0 VA (11W)
- DC: 300 mA max.
Flow Inputs:
Analog Input:
- Accuracy: 0.01% FS at 20° C Ranges
- Voltage: 0-10 VDC, 0-5 VDC, 1-5 VDC
- Current: 4-20 mA, 0-20 mA
- Basic Measurement Resolution:16 bit
- Update Rate: 4 updates/sec
- Automatic Fault detection: Signal over/under-range, Current Loop Broken
- Calibration: Software Calibration (no trimmers) and Auto-zero Continuously
- Extended calibration: Learns Zero and Full Scale of each range using special test mode.
- Fault Protection: Reverse Polarity: No ill effects
- Over-Voltage Limit: 50 VDC Overvoltage; protection
- Over-Current Protection: Internally current limited protected to 24VDC
Pulse Inputs:
- Number of Flow Inputs: one with or without quadrature Input Impedance: 10 KΩ nominal
- Pullup Resistance: 10 KΩ to 5 VDC (menu selectable)
- Pull Down Resistance: 10 KΩ to common
- Trigger Level: (menu selectable)
- High-Level Input
- Logic On: 3 to 30 VDC
- Logic Off: 0 to 1 VDC
- Low-Level Input (mag pickup)
- Sensitivity: 10 mV or 100 mV
- Minimum Count Speed: Menu selectable
- Maximum Count Speed: Menu Selectable: 40Hz, 3000Hz, or 20 kHz
- Overvoltage Protection: 50 VDC
More Info Check Data Sheet: KEP meter ms716
Reference: https://kepmeters.com/
Other Article:
- KEPmeter MS-720 Multi-Function Flow Computer for Thermal Mass Flowmeters
- KEPmeter D Series Inductive Proximity Sensors
- Flow Computer, Batch Control, Flow and Level Indicator Fluidwell
- Brainchild BTC-4300 High-end Process and Temperature
- KEP meter ES-762 Utility Metering Flow Computer
- KEPmeter ES-749 Utility Metering Flow Computer
- KEP meter Flow Computers
- Brainchild BTC Series Established Process and Temperature Controllers
- Brainchild Safety L41 Limit Controller
