Pulsar Flow Pulse Handheld Controller is an indispensable tool for portable flow monitoring, offering a toolset that allows programming, monitoring and data acquisition. The unit is available to connect to pre-installed Flow Pulse sensors or as a self-contained kit, with instant feedback via its clear colour screen.
For true portability, the Handheld Controller will power a Flow Pulse directly, giving instant feedback on flow rate for a dynamic assessment of system or pump performance.
The Flow Pulse Handheld is available as a stand-alone unit to use with pre-existing Flow Pulse sensors, or can optionally be purchased as a complete kit with Flow Pulse and a compact and convenient carry case. Mains or battery operation, with in-car charger.
|
Pulsar Flow Pulse Handheld Controller Specifications
Physical
| Sensor body dimensions: | 210 x 125 x 50mm (8.27 x 4.92 x 1.97in) |
| Sensor body weight: | Nominal 0.6kg (1.3lbs) |
| Enclosure material/description: | Polycarbonate UL94 V2 rated, with weather-proof connectors |
| Screen: | 3.2” TFT LCD |
| Supplied cable length: | 2 metres (9.8ft) minimum |
Environmental
| Enclosure & connectors protection: | IP65 |
| Max. and min. temperature (electronics): | -20°C to +60°C (-4°F to +140°F) |
| Max. and min. temperature (battery charging): | -20°C to +40°C (-4°F to +104°F) |
Approvals
| CE approval: | Listed in the Certificate of Conformity within the manual |
Datalogging
| Storage media: | Internal flash memory |
| Storage capacity: | 3.8GB, 3.2million entry without trace, 800,000 entries with trace |
| Storage format: | PC files |
| Storage access: | File transfer to PC via USB – no driver required |
Outputs
| Analogue output: | Not available |
| Digital output: | Half Duplex RS485 to sensor, USB connection to PC for file transfer |
Programming
| Programmed parameter integrity: | Via non-volatile RAM |
Supply
| Rechargeable battery: | 11.1 Vdc Li-ion cells |
| Battery duration: | 4 – 5 hours |
| Charging methods: | Mains charger, 12 Vdc @ 2A In-car charger |
| Power supply: | 12 – 18Vdc |
| Power consumption: | 3.5W @ 12V not charging, 15W @12V when charging |
Download Datasheet: Pulsar’s Flow Pulse Handheld Controller
Reference: pulsar-pm.com
Another Article: