Description
BAMOPHAR 323 Bamo Conductivity / Resistivity is equipped with a color touch screen for the display of a multilingual menu friendly and intuitive. It provides easy reading of measurement, temperature, and state of the thresholds.
It displays a menu with all parameters for the configuration of analog outputs, thresholds set up, and regulation mode. In order to facilitate its commissioning, a programming menu can simulate the measurement, acting on the analog outputs, as well as on the thresholds.
Associated measuring cells have cell factors from 0.01 up to 10 for accurate measurements between 0 to 2 µS/cm and 20 mS/cm or O to 200 Ω.cm and 200 MΩ.cm. BAMOPHAR 323 displays an absolute or compensated temperature measurement (Access to two reference charts: 20 °C and 25 °C).
An extension terminal (wall, panel, or DIN rail mounting):
- Allows a second measuring parameter (pH, flow rate, turbidity, etc.) Data from this blind unit are displayed on the main unit
- Connected to the main unit via a 4-wire shielded cable (Cable length between both devices: max. 500 m) • RS422 and Data Logger of the main unit are shared between both units.
BAMOPHAR 323 Bamo Conductivity / Resistivity Features
- Color touch screen
- Programmable ranges:
- From 0-200 Ω .cm up to 0-200 MΩ .cm
- From 0-2 µS/cm up to 0-20 mS/cm
- Associated measuring cells: Cell factors: 10 – 1 – 0.1 – 0.01
- Temperature compensation Automatic or manual compensation
- 2 outputs 0/4-20 mA, configurable
- 4 relays (Thresholds, alarm)
- Options:
- RS422/ J-BUS + LOGGER
- Extension terminal for 2nd measuring parameter
Application
In combination with one of our conductivity cells, BAMOPHAR 323 is designed for conductivity or resistivity measurements.
Examples:
- Conductivity on drinkable and ground water
- Conductivity in cooling tower
- Resistivity on demineralized water
- Control of ultra pure water production units
BAMOPHAR 323 Bamo Conductivity / Resistivity Specification
| End-user interface | Color touch screen 4.3”, resolution 480×272 pixels |
| Display of measurements, menus, temperature, relay status | |
| Configuration: Keyword protected | |
| Measuring range | From 0-2 µS/cm up to 0-20 mS/cm or from 200 Ω.cm up to 200 MΩ.cm |
| Accuracy | ±0.3 %; ±0.3 °C |
| Connection of probe | With a BNC connector |
| Temperature compensation | Automatic with built-in Pt 100 sensor, from 0 to 100 °C |
| Manually between 0 and 100 °C | |
| Relay outputs | 4 contacts, N.O., potential free |
| Configurable thresholds | S1, independent threshold, to set up for measurement or temperature |
| S2, independent threshold, to set up for measurement or temperature | |
| S3, independent threshold, to set up for measurement or temperature or external function | |
| S4, to set up for alarming function: out of range or broken cable | |
| Hysteresis | To set up between 0 and 100 % on S1, S2 and S3 |
| Contact Initial resistance | 100 mΩ max. (voltage drop 6 V DC 1 A) |
| Switching power | 831VAAC/3A/277VAC |
| 90W/3A/30VDC |
Download Data Sheet: Conductivity Resistivity BAMOPHAR 323
Ref: bamo.eu
Other Article:
- Bamo FS4 Tank top level indicator
- Bamo SDD 911 Pressure Relief Valves ND 10 to ND 25
- Bamo VP3V S4-PPH Pneumatic 3-Way Ball Valves
- Bamo Temperature Probe with Pt 100 Ω Sensor TS 13
- Bamo TS 11 Temperature Probe with Pt 100 Ω Sensor
- Bamo BAMOPHAR 436 Turbidity Monitor
- Bamo EL Level Limnimetric Scales
- Bamo Variable Area Glass Flow Indicators E Series
- Bamo Turbidity Monitor BAMOPHAR 436
- Bamo BS – BC Conductivity and Resistivity Probes
- Bamo Resistivity Meter BAMOPHOX 319 ML-DB
- Bamo Dissolved Oxygen Monitor BAMOPHAR 451
- BAMOPHAR 364 Bamo Conductivity Meter