The Amphenol T series SwitchPlug uses a unique 360 degree precision sliding helical spring contact design to quietly and accurately switch the signal circuit safely to ground during instrument changes under load, thereby avoiding annoying thumps, pops and squeals. The sliding ring contact self-cleans every time the plug is connected preventing excessive build up of oxidization and contamination. Activation is directly off the jacks full front face assuring a positive reference point every time, and as it works instantaneously on the main circuits there is no need for the use of magnets or other elaborate switching mechanisms.
Features:
- Mono or Stereo (TRS).
- Stylish shell design.
- Robust diecast shell in Satin nickel or Black finish.
- Nickel or Gold contact plating.
- Flexible grommet cable protection.
- Improved solderability.
- Precision machined contacts.
- Standard or Bulk packaging.
- Cable OD Entry to 6.5mm (0.256”)
Options:
- Black Shell,
- Gold contacts.
Specifications :
| VALUE | ||
| GENERAL CHARACTERISTICS | Number of Contacts | 2 Pole (Mono) 3 Pole Tip Ring Sleeve (Stereo) |
| Termination | Solder, PCB or Combo | |
| Flammability rating of insulating plastics | UL94V-0 | |
| Solderability, complies with | IEC 68-2-20 | |
| Environmental | Complies with EU RoHS 2 Directive 2011/65/EU | |
| ELECTRICAL CHARACTERISTICS | Current Carrying Capacity | 10A (Depends on Mating Connector and Cable) |
| Typical Contact Resistance | ≤10mΩ | |
| Insulation resistance (initial) | >2GΩ | |
| After Damp Heat Test | ≥10³ Meg Ω | |
| Rated Voltage | 34V | |
| Test Voltage AC RMS: Dielectric Strength | 500V | |
| CLIMATIC CHARACTERISTICS | Protection Class | IP40 |
| Operating Temperature | -25ºC to +70ºC (-13ºF to 158ºF) | |
| MECHANICAL CHARACTERISTICS | Insertion and Withdrawal Force | ≥10N – ≤30N |
| Mating Cycles | Min. of 1000 cycles without any physical damage | |
| Weight | ||
| – Straight | 18g (0.039lb) | |
| – Right Angle | 25g (0.055lb) | |
| MATERIALS | Connector Housing | Nylon PA66 30% Glass Filled |
| Metal Nut | Brass | |
| Plastic Nut | Nylon PA66 30% Glass Filled | |
| Washer | Fiber / Brass / Nylon PA66 30% Glass Filled | |
| Contact Plating | Tin – 4µm Min. over 2µm Min.Cu (Copper) | |
| Silver – 0.3µm Min. over 2µm Min.Cu (Copper) | ||
| Nickel – 2µm Min. over 2µm Min.Cu (Copper) | ||
| Gold Flash – 0.05µm Min. over 2µm Min.Cu (Copper) | ||
| Contacts | Brass / Sn (Tin) over Cu (Copper) | |
Download Catalog: Amphenol Connector Catalog
Ref: Amphenol.com
Another Article:
- Asiantool A4H Electrical Rotating Connection
- TE ConnectivityHEE/HEE Connector Series for machine and Robotic
- Plugs and Jacks Amphenol T Series Switch Plug Connector
- Type of Connector from TE Connectivity
- flush-mounted Pressure and level Transmitter PZM 100/101 Series HengesbachNCS-162-RF-CH Nanaboshi Connector
- Power Connectors Amphenol HP Series