General Information
TE Connectivity‘s new range of inserts for heavy-duty connectors complies with the EN45545 European standard on flame retardancy for materials and products in railway rolling stock. The new inserts from TE meet the R22 and R23 requirements set on level HL3. They have an operating temperature range that extends from -40 to 125 degrees Celsius. The modular inserts provide customers with a high level of flexibility when configuring railway connector systems. They can be configured to hold anywhere from 1 to 216 pins and enable signal, data, and power to be transmitted via one single connector.
Rectangular Heavy Duty Connectors
Rectangular Heavy Duty Connectors (HDC) are industrial connectors designed to transmit power, data, and signals in the toughest of conditions. In environments with vibrations, risk of dust, temperature challenges, and mechanical impact, our HDC connectors provide a reliable solution with solid aluminum or thermoplastic hoods and housings with protection degrees from IP65 up to IP69k.
Approved according to EN/IEC 61984 standards, our HDC connectors range from 10A to 650A and are available with up to 288 contacts.
TE has been producing Heavy Duty Connectors (HDC) for over 60 years. The portfolio includes one of the very best in quality and sustainability, helping you to reduce go-to-market time. F
featuring a modular design, TE HDCs fit perfectly in our one-piece frame, to make installation more convenient and Time-saving, moreover the docking frame allows for blind matting in spaces with limited visibility and offers direct access, for easier installation, when compared to more traditional solutions.
With up to 48 pins in a single module, TE’s HDCs provide one of the highest densities in the market for maximum space saving in the application. TE HDCs are available with low minimum order quantities and are fully backed by TE’s expert engineering support in all regions.
HMN MODULAR SYSTEM
Modular Connector Benefit
- Maximum flexibility: multiple options to meet applications more accurately.
- High flexibility and possibility of customization
- Current up to 200A
- Voltage up to 1000V
- One-piece frame enabling toolless assembly
- Male and female in 1 frame possible
- HMN docking frame enables Blind mating
- Designed for harsh (industrial) environments
- Improved operational efficiency using automated
- Reliable and high-density contact, up to 288 positions
- The extended portfolio that others integrate with existing HDC products
- Increased flexibility and reduced size for space-saving
- Combination of different technologies within one connector Power, Signal, Pneumatic, RJ45, D-Sub, USB, Quint
- Design freedom: flexible designs so customers can choose/create a DIY interface for their equipment.
- Sustainability: The industry standardized interface and TE’s global footprint help to reduce customers’ supply chain risks.
- Robustness: designed to deliver reliable performance under the most demanding operating and environmental conditions.
Features
- Multiple insert families with up to 216 pins (standard) and up to 288 pins (HMN Dynamic) in a connector.
- Space-saving HMN modular system – enabling various combinations of power, signal and data in a single connector.
- High-density solutions in HMN Dynamic.
- Easy assembly with FMLB (first mate, last break) grounding feature.
- Reduced total cost using stamped and formed contacts in HMN Dynamic modular system.
- Multiple hoods and housing combinations in 11 sizes up to IP 69K
- Rail-compliant inserts per EN45545-2 are available
- Lightweight and compact thermoplastic connectors are available
A modular is one where power, signal, and data can be combined into a single connector rather than separate connections. The connector handles different signal types through the combination of different modules that the designer selects. Modules can also be used to accommodate nonelectrical media such as connections for airlines and fiber optics in the same device as electrical connections.
Model and Specification
| Model | Type | Arus | Voltage | Kawat |
| HMN-001-MC / FC | 1 POS | 200A | 1000 V | 25-70 mm² |
| HMN-D2-MC / FC | 2 POS | 100A | 1000 V | 10-35 mm² |
| HMN-002-MC / FC | 2 POS | 70 A | 1000 V | 10-25 mm² |
| HMN-003-M / F | 3 POS | 40 A | 690 V | 1.5-10 mm² |
| HMN-004-M / F | 4 POS | 40 A | 830 V | 1.5-6.0 mm² |
| HMN-005-MS / FS | 5 POS | 16 A | 400 V | 0.14-2.5 mm² |
| HMN-006-M / F | 6 POS | 16 A | 500 V | 0.14-4.0 mm² |
| HMN-006-PM / PF | 6 POS | 16 A | 830 V | 0.14-4.0 mm² |
| HMN-008-MC/ FC | 8 POS | 70 A | 1000 V | 10-25 mm² |
| HMN-012-M / F | 12 POS | 10.00 AM | 250 V | 0.14-2.5 mm² |
| HMN-017-M / F | 17 POS | 10.00 AM | 160 V | 0.14-2.5 mm² |
| HMN-020-M / F | 20 POS | 16 A | 500 V | 0.14-4.0 mm² |
| HMN-025-M / F | 25 POS | 5.00 AM | 50 V | 0.08-0.52 mm² |
| HMN-Q1-M / F | 2 POS Quintax 1 | 16 A | 50 V | 0.14-4.0 mm² |
| HMN-Q2-M / F | 2 POS Quintax 4 | 10.00 AM | 50 V | 0.14-4.0 mm² |
| HMN-Q3-M / F | 2 POS Quintax 8 | 5.00 AM | 50 V | 0.14-4.0 mm² |
| HMN-009-M / F | D-Sub | 5.00 AM | 50 V | 0.89-0.99 mm², |
| HMN-RJ45-M / F | RJ45 | 1.00 AM | 50 V | 0.94-1.07 mm² |
| HMN-DM | Dummy Module | 16 A | 500 V | 0.14-4.0 mm² |
| HMN-PA3 | Pneumatic Kontak | 40 A | 690 V | 0.14-4.0 mm² |
| HMN-PA2 | Pneumatic Kontak | 10.00 AM | 250 V | 0.14-4.0 mm² |
Other Article:
You must be logged in to post a comment.