Description
Bamo BAMOFLU 100 Paddle Wheel Flow Sensor causes rotation of a 5-blade paddle wheel with magnetic inserts. Variations of magnetic field produce pulses whose frequency is directly proportional to the speed of the fluid. The liquid may content no more than 2 % of solid particulates, non-magnetite and size < 0.5 mm. The viscosity may be between 0.5 and 20 cSt, beyond which an on-site calibration will be necessary.
Bamo BAMOFLU 100 Features:
- On-line flow sensor
- From ND 15 up to ND 600
- Output: Rectangular pulses
- Materials: PVC, PPH, PVDF or AISI 316
Commissioning recommendations:
- The pipeline must always be full
- Do not have liquid / gas interfaces
- The flow-rate must be between 0.8 and 10 m/s
Refer to the manual for the required straight lengths.
Application:
BAMOFLU is designed for neutral or slightly aggressive liquids, free from solid particles (demineralized water, pool water after filtration, etc.)
Bamo BAMOFLU 100 Specification:
| Output | From 38 to 45 Hz according fitting vs. pipe I.D. |
| Rectangular pulses, 5 … 24 V DC | |
| Power supply | 7 … 30 V DC / 30 mA (stabilized) |
| Sensor protected against reverse polarity | |
| Measuring range | 0.8 … 10 m/s |
| Accuracy | ± 1 % With a calibrated frequency converter |
| Repeatability | ±0.5% |
| Linearity | ± 1 % |
| Pressure limits | PPH & PVDF: 10 bar at 20 °C |
| AISI 316 L: 25 bar (with stainless steel nut) | |
| Temperature limits | PVC: 40°C; PPH: 85 °C; PVDF & AISI 316: 100 °C |
| Body | PPH or PVDF or AISI 316 L |
| Paddle wheel | E-CTFE (Halar) |
| Rotor shaft | Ceramic (Al2O3) |
| Seals | FPM (standard); EPDM on request |
| Connector | Plug DIN 43 650, IP 65 |
Download Data Sheet: Paddle Wheel Flow Sensor BAMOFLU 100
Ref: bamo.eu
Another Article:
- Bamo M25 – M40 Water-Meter
- IP100/200 Paddle Wheel Flow Meter
- Kobold Display, Indicator, and Control
- Kobold Turbine Flow Meter