Dwyer MTF Multi-tube Flow SystemIndonesia Industrial Parts

Description

Dwyer MTF Multi-tube Flow Systems are ideal for multichannel metering, mixing, or monitoring applications. Customize flow systems to meet application requirements. Systems can be configured with up to six different flow tubes with various flow capacities and flow patterns. Customize your Flow System:

Determine the flow pattern required for the application.
Select a 65 mm or 150 mm frame, along with the appropriate number of tubes required, flow pattern, and wetted parts. Choose a 150 mm Gas Proportioner Frame (Series MTP) to blend the 2 or 3 gases at required concentrations. Gas proportioner frames are typically used at 50 psi.
Choose the appropriate 65 mm or 150 mm correlated flow tubes, for air or water.
Select a valve cartridge if desired that matches the range of the flow tube.

Dwyer MTF Multi-tube Features

Ideal for multichannel metering, mixing, or monitoring applications.
Universal 65 mm or 150 mm scales with correlation charts.

Dwyer MTF Multi-tube Specification

Scales	Universal 65 mm or 150 mm scales with correlation charts.
Accuracy	Accuracy: Correlated Flow Tubes: +/- 2% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute); Direct Reading Flow Tubes: +/- 5% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute). Models FT-61, FT-62, FT-123, and FT-124 have an accuracy of +/- 5% FS @ 70 deg F (21.1 deg C) and 14.7 psia (1 atm absolute).
Repeatability	±0.25% of scale reading.
Turn-down Ratio	10:1, 20:1 with combinations of two floats installed in meter.
Maximum Operating Pressure	200 psig (13.8 bar).
Maximum Operating Temperature	250°F (121°C).
Mounting	Vertical.
Connection	1/8″ female NPT.
Flowtube	Borosilicate glass.
Float	316 stainless steel or black glass as indicated.
Float Stops	PTFE.
End Fittings	Anodized Aluminum or 316 stainless steel.
Front Shield	Polycarbonate.
Side Panels	Black, anodized aluminum.
O-rings	Buna-N on aluminum models and Fluoroelastomer on stainless steel models.