Erdco See-Flo® 3200 flow indicator

Erdco See-Flo® 3200 flow indicator

Erdco See-Flo® 3200 indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.

Erdco See-Flo® 3200 Features

  • Instantaneous flow rate measurement.
  • Observe fluid conditions for color, clarity and flow.
  • Use in horizontal or vertical piping systems.
  • Individually calibrated for fluid and operating conditions.
  • User selectable 10:1 turndown flow ranges. (See Meter Rangeability Sizing Tables)
  • User selectable units of measure including dual units of measure.
  • No floats to get stuck, tubes to break or dynamic seals to leak.
  • Low pressure loss.
  • Simple design with few parts for long service life.

     Another Article:

Erdco See-Flo® 3200 Specifications

  • Accuracy : ±2% full scale
  • Repeatability : ±1% full scale
  • Scales : Direct reading
  • Resolution: Maximum-30 division/Minimum-15 divisions
  • Rangeability : 10 to 1 turndown

Materials of Construction : 

  • Housing: Aluminum,brass, 70/30 copper/nickel, 316 stainless steel
  • Shunt: As housing or carbon steel
  • Window: Tempered glass or polycarbonate
  • Vane: Cobalt/chromium/nickel alloy with Teflon ® encapsulated magnet
  • “O” rings: buna-n, ethylene propylene, Viton® or perfluoroelastomer

Piping Connections :

  • 1⁄2″ to 1″ NPT Female
  • 1 1⁄4″ to 4″ NPT male
  • 1 1⁄2″ to 3″ Tri-clamp
  • 1 1⁄4″ to 6″ Grooved
  • 1 1⁄4″ to 6″ Beveled 1⁄2″ to 8″ 150# /300# RF/FF ANSI Flanges (carbon stl)
  • 1⁄2″ to 8″ 150# RF ANSI Flanges (stainless stl)
  • 1⁄2″ to 6″ 150# RF ANSI Flanges (aluminum)
  • 1⁄2″ to 6″ 150# FF ANSI Flanges (brass)
  • 15 to 25 mm DIN 2999/BS21/ISO R7 Female threaded
  • 15 to 150 mm DIN PN 10 Flanges (316 stainless stl & carbon stl)

Temperature Limits :

  • -23 to 85°C (-10 to 185°F) with polycarbonate window.
  • -23 to 121°C (-10 to 250°F) with buna-n o-ring.
  • -23 to 121°C (-10 to 250°F) with Viton®, ethylene propylene or perfluoroelastomer o-ring

ERDCO reserves the right to alter design and/or specifications without notice. Viton® is a registered trademark of E.I. duPont de Nemours and Co.

Download Datasheet : Erdco See-Flo® 3200

Reference : erdco.com

Share
%d bloggers like this: