Bamo BR Metallic Flow Controller

Bamo BR Metallic Flow Controller controls the flow-rate in a vertical pipe with ascending flow; the Liquid must be free of particles. These blind-type controllers accept high operating pressures. The fluid passing through the controller, from bottom to top, drives a diver with a built-in magnet which actuates an external Reed contact, adjustable all along the body. The cylindrical diver moves inside a tube perforated with conical slots.

The setting of the trigger point is possible over the entire measuring range. The actual flow-rate can be greater than the high range without damaging the device (it results in a higher pressure drop). These controllers must be installed far from any magnetic induction.

Bamo BR Metallic Flow Controller Features :

  • Vertical mounting
  • 1 adjustable contact
  • Material: stainless steel or brass
  • Pressure limit: up to 300 bar
  • Flow ranges within 0.1 … 50 l/min

Application:

Control of flow in cooling, lubricating piping systems, or in any compatible skids.

Another Article:

Bamo BR Metallic Flow Controller Specification:

Temperature limits -20 … +100 °C (On request: 160 °C)
Flow Ranges l/min (of water at 20 °C)
Accuracy ±5%F.S.
Contact type N.O. (without flow)
Protection Contact: IP 65
Connection DIN 43650 plug-in socket, cable gland PE 9
Brass version
Pressure limit 200 bar
Body Nickel-plated brass
Fittings Nickel-plated brass
Diver Nickel-plated brass
Seals NBR (On request: FPM or EPDM)
Stainless steel version
Pressure limit 300 bar
Body AISI 316 Ti (1.4571)
Fittings AISI 316 Ti (1.4571)
Diver AISI 316 Ti (1.4571)
Seals FPM (On request: NBR or EPDM)


Download Data Sheet: Metallic Flow Controller BR

Ref: bamo.eu

Share
%d bloggers like this: