Description
Bamo CDP-P Paddle Flow Controller is a pallet mounted perpendicular to the flow and actuates a changeover switch. The threshold ranges listed are for water at 20 ° C with horizontal pipe. Mounting could be on a vertical pipe with ascending flow; Then, the threshold value will be greater than the one in the table. The pipe slope of a flowing down piping must be less than 40 %.
Bamo CDP-P Paddle Flow Controller Features:
- For clear liquids
- Body in PPO, paddle in polypropylene
- For pipes ND 25 up to ND 65
- Mounting: On tee, or on-line with BSP ½” thread
Application:
The CDP-P is designed to control a flow-rate in water piping.
Bamo CDP-P Specification:
| Materials | Body and fitting: PPO glass fiber reinforced; Seal: NBR |
| Paddle: PP; Seal: Santoprene | |
| (Chemical resistance to Ozone; Other many disinfectants for | |
| water: On request) | |
| Fitting | BSP ½” |
| Torque | 7 N.m |
| Piping | From ND 25 up to ND 65 |
| Temperature limits | Liquid: +5 … +80 °C |
| Ambient: +5 … +50 °C | |
| Pressure limit | 1 MPa (PN 10) at 20 °C |
| Contact | Reed contact: N.O. without flow |
| Switching power | 3A/250VAC |
| Trigger point | See table, listed values ± 30 % |
| Connection | Cable (max. 50 °C): 3 0.75 mm²; Length: 2 m |
| Protection | IP 65 |
Download Data Sheet: Paddle Flow Controller CDP-P
Ref: bamo.eu
Other Article:
- IP100/200 Paddle Wheel Flow Meter
- Kobold Display, Indicator, and Control
- Pulsar Point Level Devices
- Paddle Level Switch