Bamo CDP Paddle Flow Controller operates a switch outside the liquid: The flow drives the paddle. A magnet on top of the paddle actuates a Reed contact, located outside the fluid. The reverse movement of the paddle is generated by a leaf spring.
These controllers offer a simple, reliable, and inexpensive solution for flow monitoring in pipelines. CDP controllers are mounted in-line, pipes up to ND 50 with a Tee, BSPF threads. For larger diameters, CDP must be mounted online, on an adaptor BSP ½” female thread.
Bamo CDP Paddle Flow Controller Features:
- 1 Reed contact N.O. / N.C.
- Stainless steel or brass versions
- Low pressure drop
- Fittings: On tee up to ND50 or BSP ½”
Accessories:
- The Reed contact has a low switching power:
The use of a relay ES 2001 (doc. 250-02) will protect the Reed and allows a remote loop signal with greater breaking capacity on a change-over relay output (500 VA/ 250 V A / 5A – 1A/ 125 V DC/ 40 W).
Application:
Detection of presence or absence of flow of a liquid in a pipe under pressure. The liquid must be free of magnetic particles.
Bamo CDP Paddle Flow Controller Specification
| Body | AISI 316 Ti |
| Brass | |
| Seal | FPM on stainless steel version |
| NBR on brass version | |
| Temperature limit | 110 °C |
| Ambient temperature | 70 °C |
| Pressure limit | 25 bar |
| Fittings | DN 10 to DN 50: Tee with BSP female threads |
| ND 50 and larger: male thread BSP ½” | |
| Contact output | N.O. or N.C. according the Reed contact orientation |
| Switching power | 230 V / 1.5 A / 80 W / 90 VA max. |
| Output cable | PVC; 3-wire; 1 mm² ; 1.5 m long |
| Trigger point adjustment | ±15 % of table values, horizontal pipe; See next page |
| Protection | IP 65 |
Download Data Sheet: Paddle Flow Controller CDP
Ref: bamo.eu
Another Article:
- Bamo CDP 57 Paddle Flow Controller
- IP100/200 Paddle Wheel Flow Meter
- Bamo MNR 7 Magnetic Level Controllers
- Kobold Display, Indicator, and Control