Bamo SIG 4.0 Analogue Transmitter for Flow Controllers

Description

Bamo SIG 4.0 Analogue Transmitter for Flow Controllers works on the principle of Hall effect. It detects the position of the magnetic diver or orifice plate of the controller and delivers a signal proportional to the flow rate. The ”SIG 4.0” is supplied fitted and secured on the flow controller, already set up.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo SIG 4.0 Analogue Transmitter Features:

• For flow controllers
• Output: 4 … 20 mA or 0 … 10 V
• Accuracy: ±10 % FS
• Already set in factory

Application:

Continuous monitoring of flow rates on cooling, lubricating systems, and more.

Note:

Refer to flow controller specifications for mounting recommendations. The transmitter ” SIG 4.0 ” must not be removed from the flow controller.

Bamo SIG 4.0 Analogue Transmitter Specification:

Analogue output	4 … 20 mA or 0 … 10 V (max. 600 Ω)
Power supply	24 V DC (19 … 30 V DC)
Consumption	Max. 10 mA / 1 W
Accuracy	±10 % F.S.
Ambient temperature	-20 °C … +70 °C
Operating temperature	-20 °C … +80 °C
Material	Aluminum (blue, anodized)
Protection	IP 65
Connection	M12 connector, 5 pins (included)

Download Data Sheet: Analogue Transmitter for Flow Controllers SIG 4.0

Ref: bamo.eu

Another Article:

• Bamo ES 5000 Relay for Resistive Level Detection
• Gas Sensor | Gas Detector
• AI- Tek RH Series Instruments Magnetic Hall Effect Sensors
• AI- Tek Instruments Magnetic Hall Effect Sensor BH Series