Description
The study of innovative solutions and the application of new technologies make it possible for continuous improvement of the complete range of products and, in many cases, an increase in their performance.
The experimentation of the new technical solutions and the very stringent reliability tests which every new product is subjected to, guarantee the safety and the quality of all products introduced into the market.
Elektrogas Solenoid Valve
VMH,VMP Series
VMR Series
VML Series
Safety solenoid valves for air and gas slow opening and fast closing The VML type valve is a safety valve that is normally closed, with a fast or slow opening and an adjustable rapid section for initial gas flow. When not in the working position the spring works on the disc keeping the gas passage closed. When the coil is powered […]
VMM Series
Multiple safety solenoid valves for gas regulating trains The VMM type valve is a combination of two valves in an only compact and versatile valve housing. The first valve is a fast opening safety solenoid valve. The second valve may be a fast opening or a slow opening solenoid valve to adjust the gas flow, […]
EVRMNC, EVRM6NC Series
Safety solenoid valves for gas with manual reset normally closed The EVRM-NC type valve is a manual reset safety valve that is normally closed. When the coil is not energized the spring works on the shutter keeping the gas passage closed. Simply by energizing the coil the valve does not open. It is necessary to manually […]
EVRMNA, EVRM6NA Series
MODEL/TYPE: The EVRM-NA type valve is a manual reset safety valve that is normally open. Manual operation is, therefore, necessary to open the valve and set the mechanism consenting to maintain this state.
The powered by means of line current and/or condenser discharge, induced by the leakage detector, causes tripping of the mechanism and consequent closing of the gas passage. If energizing of the sensor persists due to the presence of gas, the valve remains under power and does not
VF,VFH Series
Butterfly valves for air and gas VF and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using a lever (to setup the high-fire rate of the burner) or automatically using a servomotor (modulating or staged control) or a solenoid actuator (two-stage control). The setting can […]
VRA,VLA,VTA Series
Solenoid valves for combustion air regulation The VRA/VLA/VTA types are normally closed solenoid valves for cold combustion air regulation. When the coil is not energized the spring works on the disc, keeping the adjusted minimum passage of air. When powering the coil the valve opens, moving the disc to the maximum open position. When power […]
SR,SL ,ST Series
Solenoid actuator for butterfly valves Solenoid actuators is designed to operate VF and VFH butterfly valves. When the coil is not energized the innerspring pushes down the plunger and, by means of a gear mating, shifts the connected valve to the minimum opening position. When the coil is powered the plunger moves up fast (SR) […]
MZ Series
Servomotor for butterfly valves Servomotors MZ are designed to operate VF and VFH butterfly valves. They consist of a multi-stage spur gearbox with DC motor, driven by an electronic control unit. This allows high torque and adjustable running time. MZ3 type is suitable for basic adjusting position, operated by cams connected to the driving shaft. MZ5 […]
FG Series
Gas filters Filters for gas pipelines with a very high holding capacity of dust and impurities, suitable for protection of devices installed downstream. The filter cartridge is a steel supported frame covered with a high-performance nonwoven made of polypropylene fibers, which satisfy the stringent requirements of Fire Class F1 according to DIN 53438 and thus […]
PCS Series
Proof of closure switch The PCS is a mechanically activated switch for monitoring the position of the valve plate. This device can be fitted to valves and actuators. It is designed in accordance with norm EN161 to detect the closed status. The compact, robust and functional design permits a simple and quick installation even on […]
PSG Series
The PSG 901 is an adjustable pressure switch for monitoring overpressure of air and non-aggressive gases (families 1-2-3 EN437). The pressure switch is available in different pressure ranges, all with male threaded connection G1/4. Special versions are available for use with aggressive gases. The compact, robust and functional design permits a simple, quick, and essentially maintenance-free installation.
Read More Articles :
- Alicat LC-Series Liquid Flow Controllers
- Alicat Bio Reactors Mass Flow Controllers
- Alicat MCQ-Series High Pressure Gas Mass Flow Controllers
- Alicat MCS-Series Anti-Corrosive Gas Mass Flow Controllers
- Alicat MC-Series Gas Mass Flow Controllers
Contact us : sales@wmablog.com or visit to our E-Commerce
