Description
Flux FMO 101 Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety.
In automatic mode it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.
The housing parts of the flow meters FMO form a measuring chamber in which the oval rotors mounted on axes can turn. The fluid flows through the measuring chamber and thus actuates the oval rotors. By the means of a Reed sensor the number of rotations is counted and forwarded as an impulse or passed on to the evaluation unit FLUXTRONIC®. This calculates the flown through quantity of the fluid based on the previously entered, medium-dependent calibrating constant.
Flux FMO 101 Flow Meter Features:
- Oval rotor principle
- For thin to highly viscous pure media
- Available with integrated evaluation unit FLUXTRONIC® or as impulse version for the use in piping systems
- Depending the type for use with drum pumps or eccentric worm-drive pumps
- High accuracy and repeat accuracy
- Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
- Can be used for ex-applications in Zone 1
- Also available with FOOD and FDA certification
Advantages:
- Batch operation possible (automatic mode)
- Very precise dosing possible
- High resistance
- Wide range of viscosities can be covered
- Can also be used for pulsating volume flows
- Low pressure loss
- Versions also available for hazardous areas
Application:
- Oils
- Gasoline
- Solvents
- Not self-lubricating media
- Grease
Flux FMO 101 Flow Meter Specification:
| Protection class | IP 54 | |
| Application areas | For manual or semi-automatic filling | |
| Flow rate | ||
| at viscosity < 5 mPas | 0,09-1,67 l/min | 0,44-8,3 l/min |
| at viscosity > 5 mPas | 0,04-1,67 l/min | 0,25-8,3 l/min |
| Measurement error of the flow rate | ||
| at viscosity < 5 mPas | +/- 2,5 % | |
| at viscosity > 5 mPas | +/- 1 % | |
| Repeatability | +/- 0,03 % | |
| Operating pressure max. | PVDF: 10 bar S: 100 bar | |
| Viscosity max | Up to 1.000 mPas | |
| Material housing | Stainless steel, Polyvinylidene fluoride | |
Download Data Sheet: Flow Meter FMO 101
Ref: flux-pumps.com
Other Article:
- Flux Flow Meter FMO 102 Series
- Flux FMO 104 Series Flow Meter
- Flux FMO 140 Flow Meter
- Flux FMO 150 Flow Meter
- Flux FMO 110 Flow Meter