Overview
Flux FMO 140 Flow Meter built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost all kinds of fluids can be performed with maximum precision and highest safety. In automatic mode, it is possible to output a signal for control purposes with the evaluation unit and the use of a switching amplifier. This way e.g. motor and / or magnetic valve and the most different processes can be controlled.
The flow meters FMO consist of a measuring chamber with oval rotors. The fluid runs through the measuring chamber and thus drives the oval rotors. With a REED sensor the number of rotations is counted and passed to the external FLUXTRONIC®. This calculates the flow quantity of the fluid on the basis of a previously given, medium-dependent calibration constant.
The FMO 140 oval rotor flow meter is suitable for use with thin to highly viscous, clean liquids. With the FLUXTRONIC®, batching and dosing a wide variety of liquids can be performed with a high degree of accuracy and safety. In automatic mode it is possible to batch and meter. For example, when paired with the FAE hand nozzle and FSV amplifier, one-touch batching with automatic shutoff is possible.
Flux FMO 140 Flow Meter Features:
- Oval rotor design
- For thin to highly viscous pure media
- Available with integrated evaluation unit FLUXTRONIC® or as impulse version
- For the use in piping systems
- High accuracy and repeat accuracy
- Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
- Can be displayed in liter, gallons or kilogram
- Semi-automatic filling with a switching amplifier possible
- Can be used for ex-applications in Zone 1
Application:
- Oils
- Gasoline
- Solvents
- Not self-lubricating media
Advantages:
- Very precise dosing possible
- High resistancy
- Wide range of viscosities can be covered
- Can also be used for pulsating volume flows
- Low pressure loss
- Also available in Version with FDA CFR 21
Flux FMO 140 Flow Meter Specification:
- Flow rate: min. 9,5 l/min – max. 245 l/min
- Filling accuracy: +/- 0,5 %
- Operating pressure: max. 16 bar1
- Viscosity: min. 1 mPas – max. 500.000 mPas2
- Housing Materials:
- Media / Fluids:
- Application areas: For stationary use in plant engineering such as e.g. pipelines
- Protection class: IP 54
Benefits
- Very precise dosing possible
- High resistance
- A wide range of viscosities can be covered
- Can also be used for pulsating volume flows
- Low-pressure loss
- Also available in Version with FDA CFR 21
Technical Data
- Flow rate: 3-59 GPM (15-227 l/min)
- Measurement error of the flow rate < 5 cPs: +/- 1%
- Measurement error of the flow rate > 5 cPs: +/- 0.5%
- Operating pressure max: 232 PSI
- Viscosity max: 500,000 cPs
- Housing Materials: Stainless steel, Aluminium
- Fluids: Acids Alkalis, Petroleum products, Highly flammable media, Solvents, Fuels
Product attributes
- Oval rotor design
- For thin to highly viscous pure media
- Available with integrated evaluation unit FLUXTRONIC® or as impulse version
- For the use in piping systems
- High accuracy and repeat accuracy
- Signal can be forwarded to FLUXTRONIC® or another external control as e.g. PLC
- Can be displayed in liter, gallons or kilogram
- Semi-automatic filling with a switching amplifier possible
- Can be used for ex-applications in Zone 1
- Very precise dosing possible
- High resistancy
- Wide range of viscosities can be covered
- Can also be used for pulsating volume flows
- Low pressure loss
- Also available in Version with FDA CFR 21
Advantages/characteristics:
- Simple operating concept
- All data will be maintained when replacing the battery
- Four safety levels with PIN setting
- Three additional outlets
- For mounting on flow meters, on nozzles or e.g. on the wall
- Calibration on medium possible
- Shows filled quantity (normal operation)
- With switching amplifier batch mode possible (automatic mode)
- Ex-proofed
Flow meter FMO Flow meter FMO Advantages/characteristics:
- Oval rotor design
- For low-viscosity to high-viscosity media
- With integrated digital display unit FLUXTRONIC® or available as pulse version
- Depending on type for use with drum/eccentric worm-drive pump or for use in piping
- Flow rate of 0,04 – 380 l/min
- High accuracy and repeat accuracy
- Signal transduction at FLUXTRONIC® or other external control e. g. PCC possible
- Display in litre, gallon or kilogram possible
- Semiautomatic filling in connection with a switching amplifier possible
- For Ex-application in zone 1 (‘ Difference between the average measured values of a series of the measurements and the theoretical value (2 Bandwidth between several measurements under identical conditions * Version Reed/Reed or Hall/Hall possible
Download Data Sheet: Flow Meter FMO 140
Ref: flux-pumps.com
Another Article:
- Flux Flow Meter FMO 104 Series
- Flux Flow Meter FMO 102 Series
- Flux Flow Meter FMO 101
- Flux Flow Meter FMO 110
- Flux FMO 150 Flow Meter