Ryuki FLO-70 Rotameter Special Assembly

Ryuki FLO-70

For laboratories, we can manufacture a combination of 2 to 5 stations, thermometers, pressure gauges, valves, and bases.

This is a high-precision area-type flow meter that can read the instantaneous flow rates of various liquids and gases directly from the scale indicated by the float. The flow rate can be adjusted freely by adjusting the valve. Used for general equipment and panel mounting in academic research institutions and other industries.

Model number

FLO-L70 type (with a thermometer, pressure gauge, valve, base)
FLO-L70 type (with a thermometer, 2 stations)
FLO-L70 type (special assembly)

Another Article:

General specifications

Measuring fluid Liquid (water, cooling water, transparent liquid)
Gas (air, nitrogen, argon, carbon dioxide, etc.)
Scale range 10: 1
Flow rate Liquid 7 ~ 70L / min
Gas 90-900NL / min
Body material Brass (BS), SUS304, SS, etc.
Tapered tube material Hard glass
Float material Liquid SUS304 SUS316
Gaseous aluminum
Packing NBR, CR (neoprene), Viton
Connection method Rc connection
Port size Refer to the measurement range table
Flow rate accuracy Within ± 2% FS
Mounting direction Vertical direction
Flow direction Please specify by model code
Maximum working pressure 0.7MPa
Maximum operating temperature 80 ℃ (Varies depending on the material)
Thermal shock 50 ℃ or less
External dimensions Refer to the measurement range table

Measurement range (Please contact us for other products as well.)

Classification No Flow rate display Flow rate display Port size External dimensions mm
H2O (L / min) AIR (NL / min) Rc
0 0.001 to 0.01 0.01-0.1 1 / 4B 345
1 0.05-0.5 0.5-5 1 / 4B 345
2 0.2-2.0 5-50 1 / 4B 345
Three 0.5-5 15-150 1 / 4B 345
Four 1-10 20-200 1 / 2B 345
Five 2-20 40-400 3 / 4B 475
6 4-40 60-600 1B 555
7 7-70 90-900 1B 565

● We will manufacture after confirming the fluid name, density, viscosity, pressure, temperature, flow range, connection standard, body material, packing material, etc.
● For liquid measurement (Float: SUS304, etc.)
* Density = 1.0 g / cm3 and viscosity = 1 cP as standard.

● For gas measurement (Float: Aluminum etc.)
* AIR 20 ° C is flown, and the flow rate value is converted to the standard state AIR, 0 ° C 1 atm (atmospheric pressure). (Unit: NL / min)
* Products are converted to standard conditions (atmospheric pressure 20 ° C) upon request. (Unit: SL / min)

Model code (please tell us when making an inquiry)

Flow direction fluid Classification Wetted material valve Packing material Thermometer (t) / Pressure gauge (p) Flow range, operating temperature, pressure
FLO-L70 -□ -□ -0 □ -T -V -P -□
A [AIR] 0 BS N [None] 1 [NBR] 0-None
2
[Lower horizontal (right) → Upper horizontal (left)]
W [Wed] 1 SUS304 U [top] 2 [CR (neoprene)] 1-pt available
Three
[Bottom side (left) → Topside (right)]
2 SS D [bottom] 3 [FKM Viton] 2-t available
Four
[Behind the back → Back]
Three 3-p available
Four Notices
Five
6
7
  • Details of the flow range, operating pressure, and temperature are required.
    Please fill in if the fluid is other than air or water.
    Consult us for fittings such as hose nipples, half unions and elbow unions as accessories.

Model code entry example
Example ① FLO-L70-3-A-02-TBS-VU-P1-1 Flow rate range 3 to 30NL / min, temperature 20 ℃, pressure 0.101MPa
Accessories: Not required Product image ⑦
Example ② FLO-L70-3-A-03-TBS-V0-P1-2-2 series flow rate range 5 to 20NL / min, temperature 20 ° C, pressure 0.101MPa (A)
FLO-L70-3-A-04-TBS-VU-P1-1-2 series flow rate range 20 ~ 200L / min, temperature 20 ℃, pressure 0.101MPa (A)
Accessories: Not required Product image 製品

About repeat products
Please tell us the serial number FM ○○○ ・ ・ ・ (○ is 5 to 6 digits) written on the nameplate when making an inquiry.

Reference:http://www.ryuki.jp