Maeda Koki MKT Oil Signal Indicator

Maeda Koki MKT Oil Signal Protest a form

Since this product is using the tube of taper form for a transparent tube, it can beused also as a flow rate viewing type of a short form by seeing the related position ofa ball and the indicating red line.

Since the spring is being used for this product in a transparent tube, the postureswhen attaching are freedom, such as facing up, facing down, and sideways.The heat resistant is 80 ℃.Standard pressure resistance : 1MPa

  • It shows flow quantity by viewing
    Because I use a transparent taper pipe, I can confirm approximate flow quantity by looking at a ball (or a float) and the position with the indication red line concerned.
  • The installation direction does not matter
    Because I use a spring inside, the posture when I attach it looks up and looks down and can perform sideways-facing freely.
Model Dimensions (mm) Maximum flow quantity
(L/min)
Connection diameter Full length Overall width
Right?
ji
Include
See
Form
MKT25-1TL Rc1/8 78 25 5
MKT25-2TL Rc1/4 78 25 5
MKT25-3TL Rc3/8 84 25 5
MKT30-2TL Rc1/4 104 30 10
MKT30-3TL Rc3/8 104 30 10
MKT30-4TL Rc1/2 110 30 10

MKT Oil Signal Protest a form

Model Dimensions (mm) Maximum flow quantity
(L/min)
Connection diameter Full length Overall width
Copper
Pipe
Business
MKT25-4 φ 4 96 25 1.5
MKT25-6 φ 6 98 25 3
MKT25-8 φ 8 100 25 5
MKT25-10 φ 10 105 25 5

MKT Oil Signal For Copper Pipe

Another Article:

In the case of an order, an estimate □Please appoint the inside of this.

Model
MKT □*-□TL
Kind of the oil
(or viscosity □cSt of the oil)
Common use flow quantity
□L/min

An example: Kind ISOVG32 common use flow quantity 3L/min of the MKT25-2TL oil
※Supplement about the model

The model in case of the R screw is MKT a connection entrance exit □* -□It becomes TOL. An example: MKT25-3TOL
The model in case of the R screw is MKT a connection entrance □* -□It becomes TOML. An example: MKT25-3TOML
The model in case of the R screw is MKT a connection exit □* -□It becomes TMOL. An example: MKT25-3TMOL

Standard specifications (protest a form)

Fluid Oil
Connection Rc internal thread Change to R screw
The combination with the R screw is possible, too.
Heat-resistant temperature A maximum of 80 degrees Celsius
Withstand pressure 1MPa
Materials Transparent taper pipe Acrylic
Coupling C3604 (brass) I can produce the product made in SUS, too.
Spring SUS304
Nylon ball Nylon 66 I may use a cylindrical float.

Standard specifications (for the copper pipe)

Fluid Oil
Connection The reference mentioned above
Heat-resistant temperature A maximum of 80 degrees Celsius
 Withstand pressure 1MPa
Materials Transparent taper pipe Acrylic
Coupling C3604 (brass)
Cap nut C3604 (brass)
 Zipper sleeve Cu
Spring SUS304
Nylon ball Nylon 66 I may use a cylindrical float.

Reference: https://maedakoki.co.jp