AW-Lake Nject Chemical Injection Flow Meter

AW-Lake Nject Chemical Injection Flow Meter is specifically designed for chemical injection applications in onshore oil fields. Each Nject Chemical Injection Flow Meter is individually calibrated and shipped with a calibration certificate, and a completely sealed integral sensor keeps electronics safe from environmental forces. It produces high quality resolution and high accuracy (±0.5% of reading) at low flow rates making it an economical low flow meter for use in onshore chemical injection operations. Specifically Designed for Chemical Injection Applications in Onshore Oil Fields.

AW-Lake Nject Chemical Injection Flow Meter Features

  • Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
  • Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
  • Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
  • Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
  • Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.

Advantages:

  • Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
  • Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
  • Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
  • Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
  • Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.

AW-Lake Nject Chemical Injection Flow Meter Specification:

  1. Measuring Accuracy: ± 0.5%
  2. Repeatability: ± 0.1%
  3. Duty Cycle: Works with standard injection pumps from 50 to 200 gallons/day
  4. Maximum Operating Pressure: Up to 2,500 psi (172 bar)*
  5. Fluid Temperature Range: -40 to 175˚F
  6. Resolution: 100,000 pulses/gal
  7. Ports: 1/4” female NPT
  8. Weight: 3.9 lbs
  9. Filtration: 120 microns, 120 mesh
  10. Materials of Construction
    • Body 316L Stainless Steel
    • Gears Stainless Steel
    • Bearing & Shaft Tungsten Carbide
    • O-Ring PTFE
    • Bolts 316 Stainless Steel
    • Cable Gland Stainless Steel

Download Data Sheet: Nject Chemical Injection Flow Meter

Ref: aw-lake.com

Another Article:

Share
%d bloggers like this: