Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.
Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.
Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.
Paddle Wheel Flow Sensor BAMOFLU 100
The liquid flow, causes rotation of a 5-blade paddle wheel with magnetic inserts. Variations of magnetic field produce pulses whose frequency is directly proportional to the speed of the fluid. The liquid may content no more than 2 % of solid particulates, non-magnetite and size < 0.5 mm. The viscosity may be between 0.5 and 20 cSt, beyond which an on-site calibration will be necessary.
- The pipeline must always be full
- Do not have liquid / gas interfaces
- The flow-rate must be between 0.8 and 10 m/s
Refer to the manual for the required straight lengths.
- On-line flow sensor
- From ND 15 up to ND 600
- Output: Rectangular pulses
- Materials: PVC, PPH, PVDF or AISI 316
BAMOFLU is designed for neutral or slightly aggressive liquids, free from solid particles (demineralized water, pool water after filtration, etc.)
|Output||From 38 to 45 Hz according fitting vs. pipe I.D.|
|Rectangular pulses, 5 … 24 V DC|
|Power supply||7 … 30 V DC / 30 mA (stabilized)|
|Sensor protected against reverse polarity|
|Measuring range||0.8 … 10 m/s|
|Accuracy||± 1 % With calibrated frequency converter|
|Linearity||± 1 %|
|Pressure limits||PPH & PVDF: 10 bar at 20 °C|
|AISI 316 L: 25 bar (with stainless steel nut)|
|Temperature limits||PVC: 40°C; PPH: 85 °C; PVDF & AISI 316: 100 °C|
|Body||PPH or PVDF or AISI 316 L|
|Paddle wheel||E-CTFE (Halar)|
|Rotor shaft||Ceramic (Al2O3)|
|Seals||FPM (standard); EPDM on request|
|Connector||Plug DIN 43 650, IP 65|
Download Data Sheet: Paddle Wheel Flow Sensor BAMOFLU 100