FLocorp MagFlo™ MMFM Magnetic Flow Meter

FLocorp MagFlo™ MMFM Magnetic Flow Meter

FLocorp MagFlo™ MMFM Magnetic Flow Meter is ideal for most liquid process applications such as pulp and paper, agricultural, chemical, water, wastewater, oil and gas, and OEM applications. The units are offered in a wide variety of sizes and flow ranges. The MAGFLO™ is available in flanged and wafer style. Line sizes available range from 1/2 inch to 24 inches.

FLocorp MagFlo™ MMFM Features and Benefits

  • No moving parts
  • Virtually no pressure drop
  • Minimal maintenance
  • Wide range of flow rate and connection sizes
  • A broad selection of lining and electrode materials
  • Economically priced
  • HART or Modbus Communications
  • Auto-Diagnostics with Alarms

     Another Article:

Specifications

 

 

Power Supply

•  110 – 240 VAC, 45~65 Hz (Single

Phase AC)

•    18 – 36 VDC

•  Battery

Zero-point Stability Automatic correction or programmable
Ambient Temperature Hard Rubber Liner: -20 to 140ºF (-20 to 60ºC) PTFE Liner: -20 to 248º (-20 to 120ºC)
Power Consumption Approx. 10W max. with sensors connected Electrode Materials Standard: SS316L

Optional: Titanium; Hastelloy Alloy C; Tantalum

 

Accuracy

± 0.5% accuracy of rate from .98 to 40 ft/s

± 1.0% accuracy of rate from .32 to .98 ft/s

 

Liner Material

PTFE, Hard Rubber, Other Liner Material Upon Request
Repeatability 0.2%
Fluid Temperature PTFE: 248º F standard (customized 356ºF) Rubber: 140ºF
Minimum Fluid Conductivity 5.0 micromhos/0.39”
Pressure Limits Standard: 165 PSIG

Optional: 580 PSIG

Flow Direction Unidirectional or bidirectional, 2 separate

totalizers (programmable)

Coil Power Pulsed DC
Analog Outputs 4-20mA, 750ohms max load Pipe Spool Material  

SS316 Flow Tube beneath liner

Output Frequency Scaled pulse output, (open collector) max 5Khz
Meter Housing Material Carbon Steel – Standard (ISO 7005-1)

Polyurthane Coated

Optional Stainless Steel Grounding Rings

Noise Damping Programmable via HART or Push Buttons
Pulse Width Programmable up to 500 ms via HART or

Push Buttons

Process Connections Standard: ANSI 150 lbs RF Type

Other sizes and pressure ratings on request

Grounding Rings or Electrode Standard: SS316L

Optional: Titanium; Hastelloy Alloy C; Tantalum

Download Datasheet: MagFlo™, Flocorp MMFM Magnetic Flow Meter

Ref: Flo-corp.com

Share