PDFlo PDTX4, Flocorp Four Wire Flow Transmitter or Monitor

Flow measurement sometimes relies on extreme accuracy despite changing viscosity conditions, and when it does, PDFlo flocorp positive displacement flow meters are the right choice. This reliability coupled with a large turndown range offers an affordable replacement for older turbine technology. Beyond their measurement ability, the solid construction and dynamic response of these meters causes them to stand the test of time, even in extreme process conditions.

The Floqcorp PDFlo™ PDTX4 is a four-wire, meter mounted digital flow transmitter that is compatible with most PDFlo flow meters. A large, back-lighted LCD graphic display provides an easy to read indication of flow rate or total in user-programmable engineering units. To change any key functions, simply use the magnet that is attached. No opening of the enclosure is required.

To prevent the magnet from entering the programming mode inadvertently, an onboard jumper controls the ability to allow programming via external magnet. An isolated input also allows for remote rest of the totalizer. A 4-20 mA rate output with user-programmable filtering and scaling is also provided for remote indication.

Features and Benefits

  • Digital meter mounted flow transmitter
  • Flow rate / total screens
  • 4-20 mA rate output and scaled pulse output
  • Gate time function
  • HART communication protocol (optional)
  • Test point for external frequency input
  • Programmable outputs
  • Magnetically select any key function
  • Explosion Proof (optional)

Specifications of  Floqcorp PDFlo™ PDTX4 i

Power Requirement 15-24 VDC/150 mA (Customer Supplied)
Analog Output 4-20 mA 16-bit isolated loop powered 2-wire output; 12-27 VDC loop supply
Max. Load Impedance: 500 Ohm @ 27V; 250 Ohm @ 12V
Enclosure Certifications Class I, Groups B, C, D; Class II, Groups E, F, G; Class II;
NEMA 4X; 7BCD, 9EFG
CSA Certifications: Class 1 Div. 1, Class II, Div. 1
Sensor/ Transmitter Frequency Range 0-4000 Hz
Temperature Ratings -4˚ to 140˚F (-20˚ to 60˚C) Ambient
Conduit Entry 3/4” NPT Conduit Entry
Two Opto-Isolated Open-Collector Outputs 5-30 VDC Rating, 50 mA Max. (Min. Load Impedance Required, 600 Ohm @ 30 VDC)
Opto-Isolated Reset Input 5-30 VDC Input, 3.3 Kohm Impedance

Download Datasheet: PDFlo™ PDTX4 Four-Wire Flow Transmitter or Monitor

Others articles

 

Ref: Flo-corp.com

Share
%d bloggers like this: