Flow measuring of liquids and gas can be used in the chemical industry or medical or laboratory engineering. The remarkable features of this device are Precision, reliability, and efficiency. This device has a robust mechanical system with a low rate of wear and an extremely compact design.
The Heinrichs V31 Variable Area metering device is used for flow metering, dosing, monitoring, and control of liquid and gas media in pipes. The scale on the device shows the flow rate expressed as volume or mass per unit of time.
Applications
Flow metering of liquids and gases e.g. in the chemical industry or in medical or laboratory engineering. The current flow rate in volume or mass per unit in time is shown.
Special features
- Modular device concept
- User friendly design
- Chip guard
- Limit switches (option)
Technical Data
| Water: | 20 °C, min: 6,5-65 l/h, max:1.000-10.000l/h | |
| Air: | 0 °C, 1,013 bar abs., min: 150-1.500 Nl/h, max:18.000-180.000 Nl/h | |
| Display: | Flow rate units on the glass cone. | |
| (acc. VDE/VDI 3513, page 2): | ||
| Liquid: 1,6% | ||
| Gas: 2,5% | ||
| Applications: | Metering of liquid products with suitable viscosity, free of solids, not clog and do not tend to form deposits. | |
| Gases with linear flow characteristics and adequate inlet pressure | ||
| Ambient conditions: | Ambient temperature | : -20°C up to +80°C |
| Fluid conditions: | Nominal pressure: | 15 bar max. (depends on temperature and material, details see relevant data sheet) |
| All pressure data refer to liquids without danger potential and proper and stress free installation of the equipment. | ||
Download Catalog: Variable Area Flow Meter Model V31-Heinrichs
Ref: Heinrichs.com
Another Article:
- D22 Pressure Transmitter Delta Mobrey
- Hengesbach Pressure Transmitter DME 11 Series
- Differential Pressure Transmitter D32 Series Delta Mobrey
- LEEG Pressure Transmitter, Sensor and Switch
- 8000 SAN Pressure Transmitter Delta Mobrey